标准翻译
中国标准英文版
翻译服务中心

中国翻译协会
理事单位

华联亚通翻译

                                                        
                          



标准翻译咨询:400 810 0369
QQ:点击这里给我发消息1041554835

关于我们 服务流程 帐户信息 

国际、国内标准搜索   
免责声明 私隐政策


支付宝帐户:hlyt2008@163.com
如搜索:"GB 50227-2008并联电容器装置设计规范",可在上面搜索框中输入“50227”或“并联电容器装置”进行检索。
 
 
咨询: IEC  标准有关信息
电话:400 810 0369(当地市话费) ; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com ; QQ:点击这里给我发消息158894832点击这里给我发消息1041554835点击这里给我发消息717234393
标准号首字母 -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
| IEC | IEC TR | IEC/PAS | IEC/TR | IEC/TS | IEC/UIC | IEEE | IEEE/ASTM | IEV | 下一页
 
序号

IEC标准列表:

1IEC 60076-1-1993 电力变压器.第1部分:总则 Power Transformers-Part 1: General Transformateurs De Puissance-Partie 1: Generalites Second Edition; Corrigendum: 06-1997; Amendment 1: 09-1999

中文版正文页数:95译文报价:10047.00译文优惠价:8791.00

2IEC 60211-1966 1.0级最大需量指示器 Maximum demand indicators, Class 1.O.

31000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-10-2000 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第10部分:试验测量或防护手段检测的复合测量设备 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective mea

41000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-1-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第1部分:一般要求 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring and monitoring of protective measures - Part 1: General requirements

51000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-2-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第2部分:绝缘电阻 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring and monitoring of protective measures - Part 2: Insulation resistance

61000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-3-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第3部分:回线阻抗 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

71000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-4-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第4部分:地面连接和等电位连接的电阻 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding

81000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-5-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第5部分:地面阻力 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring and monitoring of protective measures - Part 5: Resistance to earth

91000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-6-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第6部分:TT和TN系统中的剩余电流设备 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual current devices (RCD) in TT and TN systems

101000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-7-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第7部分:相序 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence

111000V交流和1500V直流的低压分配系统的电气安全防护测量的试验,测量和监测设备 IEC 61557-8-1997 1000V交流和1500V直流的低压分配系统的电气安全.防护测量的试验,测量和监测设备.第8部分:IT系统中的绝缘监测设备 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems

121000V以上额定电压的架空电线用绝缘子交流电系统用瓷绝缘子 IEC 60433-1998 1000V以上额定电压的架空电线用绝缘子.交流电系统用瓷绝缘子.长棒型绝缘子元件的特性 Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type

13IEC 61558-2-6-2009 1100伏电源电压变压器、电抗器、电源装置及类似设备安全第2﹣6部分:安全隔离变压器和包含安全隔离变压器电源装置的特殊要求和试验 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100V Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

中文版正文页数:32英文版正文页数:16英文版正文字数:6409译文报价:1089.00译文优惠价:817.00

1412,65mm(0dianhao5 in)磁带用数字扫描混合成的盒式录象系统IEC 61327-1995 12,65mm(0.5 in)磁带用数字扫描混合成的盒式录象系统.D-3接口 Helical-scan digital composite video cassette recording system using 12,65 mm (0,5 in) magnetic tape - Format D-3

15IEC 61104-1992 12cm CD-V,小型盘式视象系统 Compact disc video system; 12 cm CD-V

1612GHz频带卫星广播接收机的测量方法IEC 61079-2-1992 12GHz频带卫星广播接收机的测量方法.第2部分:DBS调谐设备的电气测量 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 2: electrical measurements on DBS tuner units

1712GHz频带卫星广播接收机的测量方法IEC 61079-4-1993 12GHz频带卫星广播接收机的测量方法.第4部分:NTSC制式数字副载波系统 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 4: electrical measurements on sound/data decoder units for the digital subcarrier NTSC system

18IEC 60655-1979 1英寸标准电容传声器自由场灵敏度级与压力场灵敏度级的差值 Values for the difference between free-field and pressure sensitivity levels for one-inch standard condenser microphones

19IEC 60190-1966 2型非线绕电位器 Non-wirewound potentiometers Type 2

20482dianhao6mm(19in)系列机械结构件的尺寸 IEC 60297-1-1986 482.6mm(19.in)系列机械结构件的尺寸.第1部分:面板和机架 Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1 : Panels and racks

21482dianhao6mm(19in)系列机械结构件的尺寸 IEC 60297-2-1982 482.6mm(19.in)系列机械结构件的尺寸.第2部分:机箱以及机架结构间距 Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 2 : Cabinets and pitches of rack structures

22IEC 60320-2-3 AMD 1-2004 Amendment 1 - Appliance coupler for household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than IPX0 . Amendment 1 - Appliance coupler for household and similar general purposes - Part 2-3: Appliance coupler with a degree of protection higher than IPX0 .

23IEC 60730-2-13 AMD 1-1997 Amendment 1 - Automatic electrical controls for household and similar use - Part 2: Particular requirements for humidity sensing controls . Amendment 1 - Automatic electrical controls for household and similar use - Part 2: Particular requirements for humidity sensing controls .

24IEC 60684-3-216 AMD 1-2005 Amendment 1 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame retarded, limited-fire-hazard sleeving . Amendment 1 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame retarded, limited-fire-hazard sleeving .

25IEC 60335-2-24 AMD 1-2005 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers . Amendment 1 - Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers .

26IEC 60335-2-34 AMD 1-2004 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors . Amendment 1 - Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors .

27IEC 60335-2-36 AMD 1-2005 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements Amendment 1 - Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

28IEC 60335-2-5 AMD 1-2005 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers . Amendment 1 - Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers .

29IEC 60335-2-6 AMD 1-2005 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances Amendment 1 - Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

30IEC 60335-2-89 AMD 1-2005 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing un Amendment 1 - Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor .

31IEC 60675 AMD 1-1998 Amendment 1 - Household electric direct-acting room heaters - Methods for measuring performance . Amendment 1 - Household electric direct-acting room heaters - Methods for measuring performance .

32IEC 60432-1 AMD 1-2005 Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes . Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes .

33IEC 60432-2 AMD 1-2005 Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes . Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes .

34IEC 60432-3 AMD 1-2005 Amendment 1 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) . Amendment 1 - Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) .

35IEC 60353 AMD 1-2002 Amendment 1 - Line traps for a.c. power systems . Amendment 1 - Line traps for a.c. power systems .

36IEC 60269-1 AMD 1-2005 Amendment 1 - Low-voltage fuses - Part 1: General requirements . Amendment 1 - Low-voltage fuses - Part 1: General requirements .

37IEC 60947-5-3 AMD 1-2005 Amendment 1 - Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) Amendment 1 - Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) .

38IEC 60947-5-5 AMD 1-2005 Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function . Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function .

39IEC 60439-5 AMD 1-1998 Amendment 1 - Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) Amendment 1 - Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution in networks .

40IEC 60598-2-2 AMD 1-1997 Amendment 1 - Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires . Amendment 1 - Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires .

41IEC 60598-2-20 AMD 1-1998 Amendment 1 - Luminaires Part 2: Particular requirements Section 20 : Lighting chains . Amendment 1 - Luminaires Part 2: Particular requirements Section 20 : Lighting chains .

42IEC 60404-11 AMD 1-1998 Amendment 1 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip . Amendment 1 - Magnetic materials - Part 11: Method of test for the determination of surface insulation resistance of magnetic sheet and strip .

43IEC 60055-1 AMD 1-2005 Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables a Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories .

44IEC 61558-1 AMD 1-1998 Amendment 1 - Safety of power transformers, power supply units and similar - Part 1: General requirements and tests Amendment 1 - Safety of power transformers, power supply units and similar - Part 1: General requirements and tests

45IEC 62007-2 AMD 1-1998 Amendment 1 - Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods . Amendment 1 - Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods .

46IEC 60317-17 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 . Amendment 1 - Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 .

47IEC 60317-19 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 . Amendment 1 - Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 .

48IEC 60317-35 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer . Amendment 1 - Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer .

49IEC 60317-36 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer Amendment 1 - Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer

50IEC 60317-37 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer . Amendment 1 - Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer .

51IEC 60317-38 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer Amendment 1 - Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer .

52Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-12 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 12: Polyvinyl acetal enamelled round copper wire, class 120 Amendment 1 - Specifications for particular types of winding wires. Part 12: Polyvinyl acetal enamelled round copper wire, class 120

53Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-16 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 16: Polyester enamelled rectangular copper wire, class 155 . Amendment 1 - Specifications for particular types of winding wires. Part 16: Polyester enamelled rectangular copper wire, class 155 .

54Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-2 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer . Amendment 1 - Specifications for particular types of winding wires. Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer .

55Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-20 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 20: Solderable polyurethane enamelled round copper wire, class 155 . Amendment 1 - Specifications for particular types of winding wires. Part 20: Solderable polyurethane enamelled round copper wire, class 155 .

56Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-21 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 . Amendment 1 - Specifications for particular types of winding wires. Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 .

57Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-23 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 23: Solderable polyesterimide enamelled round copper wire, class 180 Amendment 1 - Specifications for particular types of winding wires. Part 23: Solderable polyesterimide enamelled round copper wire, class 180

58Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-26 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 26: Polyamide-imide enamelled round copper wire, class 200 . Amendment 1 - Specifications for particular types of winding wires. Part 26: Polyamide-imide enamelled round copper wire, class 200 .

59Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-28 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 28: Polyesterimide enamelled rectangular copper wire, class 180 . Amendment 1 - Specifications for particular types of winding wires. Part 28: Polyesterimide enamelled rectangular copper wire, class 180 .

60Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-29 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 . Amendment 1 - Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 .

61Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-30 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 30: Polyimide enamelled rectangular copper wire, class 220 . Amendment 1 - Specifications for particular types of winding wires. Part 30: Polyimide enamelled rectangular copper wire, class 220 .

62Amendment 1 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-4 AMD 1-1997 Amendment 1 - Specifications for particular types of winding wires. Part 4: Solderable polyurethane enamelled round copper wire, class 130 . Amendment 1 - Specifications for particular types of winding wires. Part 4: Solderable polyurethane enamelled round copper wire, class 130 .

63Amendment 1 - Telecontrol equipment And systems - PArt 6-802: Telecontrol protocols compAtible with ISO stAndArds And ITU-T recommendAtions - TASEIEC 60870-6-802 AMD 1-2005 Amendment 1 - Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models . Amendment 1 - Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 Object models .

64IEC 61161 AMD 1-1998 Amendment 1 - Ultrasonics power measurement in liquids in the frequency range 0,5 MHz to 25 MHz . Amendment 1 - Ultrasonics power measurement in liquids in the frequency range 0,5 MHz to 25 MHz .

65IEC 61754-6 AMD 2-2004 Amendment 2 - Fibre optic connector interfaces - Part 6: Type MU connector family . Amendment 2 - Fibre optic connector interfaces - Part 6: Type MU connector family .

66IEC 60055-2 AMD 2-2005 Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and const Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements .

67IEC 60317-0-2 AMD 2-2005 Amendment 2 - Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire . Amendment 2 - Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire .

68IEC 60317-17 AMD 2-2005 Amendment 2 - Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 . Amendment 2 - Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 .

69Amendment 2 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-1 AMD 2-1997 Amendment 2 - Specifications for particular types of winding wires. Part 1: Polyvinyl acetal enamelled round copper wire, class 105 . Amendment 2 - Specifications for particular types of winding wires. Part 1: Polyvinyl acetal enamelled round copper wire, class 105 .

70Amendment 2 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-13 AMD 2-1997 Amendment 2 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 . Amendment 2 - Specifications for particular types of winding wires. Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 .

71Amendment 2 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-25 AMD 2-1997 Amendment 2 - Specifications for particular types of winding wires. Part 25: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round aluminium wire, class 200 . Amendment 2 - Specifications for particular types of winding wires. Part 25: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round aluminium wire, class 200 .

72Amendment 2 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-7 AMD 2-1997 Amendment 2 - Specifications for particular types of winding wires. Part 7: Polyimide enamelled round copper wire, class 220 Amendment 2 - Specifications for particular types of winding wires. Part 7: Polyimide enamelled round copper wire, class 220

73Amendment 2 - SpecificAtions for pArticulAr types of winding wiresIEC 60317-8 AMD 2-1997 Amendment 2 - Specifications for particular types of winding wires. Part 8: Polyesterimide enamelled round copper wire, class 180 . Amendment 2 - Specifications for particular types of winding wires. Part 8: Polyesterimide enamelled round copper wire, class 180 .

74IEC 60851-4 AMD 2-2005 Amendment 2 - Winding wires - Test methods - Part 4: Chemical properties . Amendment 2 - Winding wires - Test methods - Part 4: Chemical properties .

75IEC 60061-2 AMD 32-2004 Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders . Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders .

76IEC 60061-1 AMD 35-2004 Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps . Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps .

77IEC 60061-4 AMD 9-2004 Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information . Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information .

78IEC 60974-1 Edition 2.1-2000 Arc welding equipment - Part 1: Welding power sources . Arc welding equipment - Part 1: Welding power sources .

79IEC 61691-1-1-2004 Behavioural languages - Part 1-1: VHDL language reference manual . Behavioural languages - Part 1-1: VHDL language reference manual .

80IEC 61691-4-2004 Behavioural languages - Part 4: Verilog? hardware description language . Behavioural languages - Part 4: Verilog? hardware description language .

81IEC 61691-5-2004 Behavioural languages - Part 5: VITAL ASIC (application specific integrated circuit) modeling specification . Behavioural languages - Part 5: VITAL ASIC (application specific integrated circuit) modeling specification .

82IEC 60670-24-2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and similar po Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and similar power consuming devices .

83IEC 60602-1980 B型螺旋扫描录像机 Type B helical video recorders

84B型螺旋扫描录像机IEC 60602 AMD 1-1987 B型螺旋扫描录像机.第1次修改 Type B helical video recorders

85IEC 61726-1999 Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method . Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method .

86CAMAC-多机箱系统组织IEC 60552-1977 CAMAC-多机箱系统组织.分支信息通道和A1型CAMAC机箱控制器规范 CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1

87CAMAC-多机箱系统组织分支信息通道和A1型CAMAC机箱控制器规范 IEC 60552 AMD 1-1984 CAMAC-多机箱系统组织.分支信息通道和A1型CAMAC机箱控制器规范.第1次修改 CAMAC - Organization of multi-crate systems. Specifications of the Branch-highway and CAMAC crate controller Type A1

88IEC 60729-1982 CAMAC机箱中的多重控制器 Multiple controllers in a CAMAC crate

89IEC 61850-SER-2005 Communication networks and systems in substations - ALL PARTS . Communication networks and systems in substations - ALL PARTS .

90IEC 60603-7-4-2005 Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

91IEC 60512-23-7-2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

92IEC 60512-25-7-2004 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) . Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) .

93IEC 62044-2-2005 Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level . Cores made of soft magnetic materials - Measuring methods - Part 2: Magnetic properties at low excitation level .

94IEC 60907-1989 CSMA/CD10Mbit/s基带的局域网规划和安装指南 Local area networks CSMA/CD 10 Mbit/s baseband planning and installation guide

95IEC 60558-1982 C型螺旋扫描磁带录像机 Type C helical video tape recorders

96C型螺旋扫描磁带录像机IEC 60558 AMD 1-1987 C型螺旋扫描磁带录像机.第1次修改 Type C helical video tape recorders

97IEC 61926-1-1999 Design automation - Part 1: Standard test language for all systems - Common abbreviated test language for all systems (C/ATLAS) . Design automation - Part 1: Standard test language for all systems - Common abbreviated test language for all systems (C/ATLAS) .

98IEC 61074-1991 Determination of heats and temperatures of melting and crystallization of electrically insulating materials by differential scanning calorimetry . Determination of heats and temperatures of melting and crystallization of electrically insulating materials by differential scanning calorimetry .

99IEC 61995-1-2005 Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements . Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements .

100IEC 61158-SER-2005 Digital data communications for measurement and control - Fieldbus for use in industrial control systems - ALL PARTS . Digital data communications for measurement and control - Fieldbus for use in industrial control systems - ALL PARTS .

101IEC 82045-2-2004 Document management - Part 2: Metadata elements and information reference model . Document management - Part 2: Metadata elements and information reference model .

102IEC 60350-CHAR-1999 Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance - Color reference chart Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance - Color reference chart

103IEC 61241-17-2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) . Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines) .

104IEC 60645-5-2004 Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance . Electroacoustics - Audiometric equipment - Part 5: Instruments for the measurement of aural acoustic impedance/admittance .

105IEC 61000-3-12-2004 Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase . Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and <=75 A per phase .

106IEC 60512-5-1992 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tes Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests .

107IEC 60512-7-1993 Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests . Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests .

108ElectromechAnicAl components for electronic equipmentfenhao bAsic testing procedures And meAsuring methodsIEC 60512-6-1984 Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests . Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests .

109IEC 61810-2-2005 Electromechanical elementary relays - Part 2: Reliability . Electromechanical elementary relays - Part 2: Reliability .

110Electronic design interchAnge formAt (EDIF) - PArt 1: Version 3 0 0IEC 61690-1-2000 Electronic design interchange format (EDIF) - Part 1: Version 3 0 0. (This publication is available in electronic HTML format only) . Electronic design interchange format (EDIF) - Part 1: Version 3 0 0. (This publication is available in electronic HTML format only) .

111Electronic design interchAnge formAt (EDIF) - PArt 2: Version 4 0 0IEC 61690-2-2000 Electronic design interchange format (EDIF) - Part 2: Version 4 0 0. (This publication is available in electronic HTML format only) . Electronic design interchange format (EDIF) - Part 2: Version 4 0 0. (This publication is available in electronic HTML format only) .

112IEC 62137-2005 Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN . Environmental and endurance testing - Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN .

113IEC 62226-1-2004 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: Genera Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General .

114IEC 62226-2-1-2004 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 2-1: Expo Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 2-1: Exposure to magnetic fields - 2D models .

115IEC 61337-1-2004 Filters using waveguide type dielectric resonators - Part 1: Generic specification . Filters using waveguide type dielectric resonators - Part 1: Generic specification .

116IEC 60695-11-5-2004 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance . Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance .

117IEC 60384-23-2005 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors . Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors .

118IEC 60384-23-1-2005 Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ .

119IEC 60684-3-403-2002 Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating . Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating .

120IEC 60684-3-420-2002 Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating . Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating .

121IEC 60684-3-100-2001 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving . Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving .

122IEC 60684-3-116-2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene - General purpose . Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene - General purpose .

123IEC 60684-3-121-2001 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving . Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving .

124IEC 60684-3-145-2001 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving . Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving .

125IEC 60684-3-240-2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving . Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving .

126IEC 60684-3-340-2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving . Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving .

127IEC 60684-3-343-2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated .

128IEC 60684-3-400-2002 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating

129IEC 60684-3-406-2003 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating . Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating .

130IEC 61499-1-2005 Function blocks - Part 1: Architecture Function blocks - Part 1: Architecture

131IEC 61499-2-2005 Function blocks - Part 2: Software tool requirements . Function blocks - Part 2: Software tool requirements .

132IEC 61511-SER-2004 Functional safety - Safety instrumented systems for the process industry sector - ALL PARTS . Functional safety - Safety instrumented systems for the process industry sector - ALL PARTS .

133IEC 61508-SER-2005 Functional safety of electrical/electronic/programmable electronic safety-related systems - ALL PARTS . Functional safety of electrical/electronic/programmable electronic safety-related systems - ALL PARTS .

134IEC 60617-DB-12M-2001 Graphical symbols for diagrams - 12-month subscription to online database comprising parts 2 to 13 of IEC 60617 Graphical symbols for diagrams - 12-month subscription to online database comprising parts 2 to 13 of IEC 60617

135IEC 60417-DB-12M-2002 Graphical symbols for use on equipment - 12-month subscription to online database comprising all graphical symbols published in IEC 60417 Graphical symbols for use on equipment - 12-month subscription to online database comprising all graphical symbols published in IEC 60417

136IEC 60417 ISO 7000-DB-12M-2004 Graphical symbols for use on equipment - 12-month subscription to online database comprising all graphical symbols published in IEC 60417 and ISO 7000 Graphical symbols for use on equipment - 12-month subscription to online database comprising all graphical symbols published in IEC 60417 and ISO 7000

137IEC 62032-2005 Guide for the application, specification, and testing of phase-shifting transformers . Guide for the application, specification, and testing of phase-shifting transformers .

138IEC 60745-2-19-2005 Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers . Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for jointers .

139IEC 62025-2-2005 High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics . High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics .

140IEC 62271-SER-2005 High-voltage switchgear and controlgear - ALL PARTS . High-voltage switchgear and controlgear - ALL PARTS .

141IEC 62209-1-2005 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific ab Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in clos

142IEC 60609-1-2004 Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines . Hydraulic turbines, storage pumps and pump-turbines - Cavitation pitting evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines .

143IEC 62345-2005 ID format for 50 mm magneto-optical disc system . ID format for 50 mm magneto-optical disc system .

144IEC 1052 FASTBUS标准程序IEC 61052-1991 IEC 1052 FASTBUS标准程序.和FASTBUS数据探测系统一起使用的标准程序 IEC 1052 FASTBUS standard routines; standard routines for use with FASTBUS data acquisition systems

145IEC 60821-1991 IEC 60821-VME总线:1比特到4比特数据微处理器系统总线 IEC 60821-VMEbus; microprocessor system bus for 1 byte to 4 byte data

146IEC 822 VSBIEC 60822-1988 IEC 822 VSB.IEC 60821VME总线的平行分系统总线 IEC 60822 VSB; parallel sub-system bus of the IEC 60821 VMEbus

147IEC DICT-2005 IEC Multilingual Dictionary on CD-ROM - 6th edition . IEC Multilingual Dictionary on CD-ROM - 6th edition .

148IEC 60038 Edition 6.2-2002 IEC 标准电压 IEC standard voltages

中文版正文页数:21译文报价:2227.00译文优惠价:1949.00

149IEC 60196-1965 IEC 标准频率 I E C standard frequencies

150IEC 60059-1999 IEC标准电流额定值 IEC standard current ratings

     下一页
咨询: IEC  标准有关信息
电话:400 810 0369(当地市话费) ; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com ; QQ:点击这里给我发消息158894832点击这里给我发消息1041554835点击这里给我发消息717234393

 缺货登记:
如在我们网站或目录中没有查到您所需要的译文,请下载缺货登记表,请尽量准确填写您所需要的标准译文信息,以电子邮件或传真方式将缺货登记表发给我们。


GB 标准、各行业标准、工程招投标书中译外专业翻译
欧、美、英、德、日等国外标准外译中专业翻译

技术资料翻译,专业口译
各类技术资料翻译及专业技术人员口译服务
笔译:130-160元/千中文字
口译/商务陪同/会展翻译/现场交传/同声传译
中国标准翻译网
(www.cn-standard.net)
北京
北京华联亚通网络信息技术有限公司
地址(总部): 中国北京海淀区知春路49号希格玛大厦B座1605室(100190)
电话:(86)10 88099016
传真:(86)10 88097217
香港
中国标准翻译有限公司
香港九龙弥敦道580号A-F 周大福商业中心1601室
电话:(852)22510719
传真:(852)27702923

标准代号:
中国国家标准(GB) 

行业标准(HB)

国际标准化组织(ISO)
国际电工委员会(IEC)
欧洲标准(EN)
美国国家标准学会(ANSI)
英国国家标准学会(BS)
德国标准化学会(DIN)
日本工业标准(JIS)
法国标准化协会(NF)
美国机械工程师协会(ASME)
美国材料与实验协会(ASTM)
美国电气电子工程师学会(IEEE)
美国保险商实验所(UL)
美国石油学会(API)
美国阀门及配件制造商协会标准(MSS)

中华人民共和国国家标准和行业标准代号

一、中华人民共和国国家标准代号

GB 强制性国家标准代号

GB/T 推荐性国家标准代号

二、中华人民共和国行业标准代号
农业 NY   水产 SC  水利 SL   林业 LY  轻工 QB   纺织 FZ  医药 YY  民政 MZ  教育 JY  烟草 YC  黑色冶金 YB  有色冶金 YS  石油天然气 SY  化工 HG   石油化工 SH  建材 jc  地质矿产 DZ  土地管理 TD  测绘 CH  机械 JB  汽车 QC  民用航空 MH  兵工民品 WJ  船舶 CB  航空 HB  航天 QJ  核工业 EJ  铁路运输 TB   交通 JT   劳动和劳动安全 LD  电子 SJ  通信 YD  广播电影电视 GY  电力 DL  金融 JR  海洋 HY  档案 DA  商检 SN  文化 WH  体育 TY  商业 SB  物资管理 WB  环境保护 HJ  稀土 XB  城镇建设 CJ  建筑工业 JG  新闻出版 CY  煤炭 MT  卫生 WS  公共安全 GA  包装 BB  地震 DB  旅游 LB  气象 QX  外经贸 WM  海关 HS  邮政 YZ  推荐性行业标准的代号是在强制性行业标准代号后面加/T,例如农业行业的推荐性行业标准代号是NY/T



标准翻译咨询:400 810 0369
QQ:1041554835

关于我们  服务流程  帐户信息  

国际、国内标准搜索     

   设为首页    收藏本站
 
免费资讯:   中国设计院名录    中国标准编制单位大全    中文核心期刊   中国标准英文版翻译目录   热门标准目录

 

京ICP备05047533号 京公网安备 11010802013345 号
北京华联亚通网络信息技术有限公司 及 中国标准翻译有限公司版权所有Copyright©2000-2016
中国标准翻译网(www.cn-standard.net)
北京
北京华联亚通网络信息技术有限公司
地址(总部): 中国北京海淀区知春路49号希格玛大厦B座1605室(100190)
电话:(86)10 88099016 传真:(86)10 88097217
香港
中国标准翻译有限公司
香港九龍旺角彌敦道610號荷李活商業中心1318-19室
电话:(852)82330220 传真:(852)27108266

MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com
QQ:点击这里给我发消息1041554835点击这里给我发消息158894832点击这里给我发消息717234393
合作伙伴:证件翻译 中国会展服务网 中国标准英文版