咨询电话:400 810 0369(市话费)
QQ:717234393

国际、国内标准搜索     

中国标准翻译网翻译专家组招募通知
咨询: DIN  标准有关信息
电话:400 810 0369(当地市话费) ; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com ; QQ:717234393 /  517865072 / 158894832
标准号首字母 -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
---> 上一页| DIN | DISC | DL | DL/T | DL/z | Doc | DZ | DZ/T | DZ/Z
 
序号

DIN标准列表:

1DIN 8150-1984 ( 格氏)平环链 Gall`s chains
2DIN EN 1112-1997 (PN 10)盥洗室管件用淋浴喷头 (Shower outlets for (PN 10) sanitary tapware; German version EN 1112:1997
3DIN EN 1113-1997 (PN 10)盥洗室管件用淋浴喷头软管 (Showers hoses for (PB 10) sanitary tapware; German version EN 1113:1997
4DIN 18013-1981 (电表)表盘用的凹座 Recesses for meter boards (electric meters)
5(机械)振动,振荡和振动设备DIN 1311-2-2002 (机械)振动,振荡和振动设备.第2部分:单自由度线性振动设备 Mechanical) vibrations, oscillations and vibration systems - Part 2: Linear vibration systems with single degree of freedom
6(气体混合物液体混合晶体)混合物的组成概念DIN 1310-1984 (气体混合物.液体.混合晶体)混合物的组成.概念.公式符号 Composition of (gaseous, liquid and solid) mixtures; concepts, symbols
7DIN EN 61161-1999 0.5MHz至25MHz范围内的液体中超声功率的测量 Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz (IEC 61161:1992 + A1:1998); German version EN 61161:1994 + A1:1998
8DIN EN 60521-1995 0.5级,1级和2级交流电度表 Classes 0,5, 1 and 2 alternating-current watthour meters (IEC 60521:1988); German version EN 60521:1995
9DIN 28020-1998 0.63立方米至25立方米卧式压力容器 Horizontal pressure vessels 0,63 m up to 25 m - Dimensions
1005啮合的直齿外齿轮DIN 3995-5-1963 05啮合的直齿外齿轮.检验尺寸M Straight external spur gears in the 05-system, gauge distance over balls for determination of tooth thickness
1105啮合的直齿外圆柱齿轮DIN 3995-8-1963 05啮合的直齿外圆柱齿轮.齿顶滑移速度 Straight external spur gears in the 05-system, sliding speed at tooth tip
1205啮合的直齿外圆柱齿轮DIN 3995-3-1963 05啮合的直齿外圆柱齿轮.齿顶圆直径 Straight external spur gears in the 05-system, tip diameter
1305啮合的直齿外圆柱齿轮DIN 3995-2-1963 05啮合的直齿外圆柱齿轮.齿根圆直径 Straight external spur gears in the 05-system, root diameter
1405啮合的直齿外圆柱齿轮DIN 3995-4-1963 05啮合的直齿外圆柱齿轮.齿间距 Straight external spur gears in the 05-system, base tangent length
1505啮合的直齿外圆柱齿轮DIN 3995-7-1963 05啮合的直齿外圆柱齿轮.啮合度 Straight external spur gears in the 05-system, contact ratio
1605啮合的直齿外圆柱齿轮DIN 3995-6-1963 05啮合的直齿外圆柱齿轮.弦齿高与弦齿厚 Straight external spur gears in the 05-system, chord of the pitch circle between the flanks of a tooth and chordal height
1705啮合的直齿外圆柱齿轮DIN 3995-1-1967 05啮合的直齿外圆柱齿轮.轴距和压力角 Straight external spur gears in the 05-system, centre distances and pressure angles on the pitch circle
1805啮合的直齿正齿轮齿顶高变位DIN 3994-1963 05啮合的直齿正齿轮齿顶高变位.导言 Addendum modification of straight spur gears in the 05-system; introduction
191dianhao0/2dianhao3 高频插塞连接DIN 47297-1986 1.0/2.3 高频插塞连接.波阻抗50Ω HF-connection 1,0/2,3; characteristic impedance 50
201dianhao4/4dianhao4 高频插塞连接DIN 47298-1986 1.4/4.4 高频插塞连接.波阻抗50Ω HF-connection 1,4/4,4; characteristic impedance 50 ohms
21DIN 6331-2003 1.5d厚的六角环形螺母 Hexagon collar nuts with a height of 1,5 d
22DIN 6330-2003 1.5d厚的六角螺母 Hexagon nuts with a height of 1,5 d
231dianhao6/5dianhao6 高频插塞连接DIN 47295-1986 1.6/5.6 高频插塞连接.波阻抗75Ω HF-connection 1,6/5,6; characteristic impedance 75 ohms
241dianhao8/5dianhao6 同轴高频插塞连接波阻抗50ΩDIN 47226-1973 1.8/5.6 同轴高频插塞连接.波阻抗50Ω.连接尺寸 HF-connection 1,8/5,6 characteristic impedance 50 ; mating dimensions
251/3HF 插接连接波阻抗50ΩDIN 47225-1971 1/3HF 插接连接.波阻抗50Ω.连接尺寸 HF-connection 1/3, characteristic impedance 50 ; mating dimensions
261.6KA以下导电连接螺栓DIN 46200-1977 1·6KA以下导电连接螺栓.电流强度的配置和设计 Current carrying connection bolts up to 1600 A; design and assignment of current intensities
271000V 以下的绝缘工具DIN 7445-1998 1000V 以下的绝缘工具.带手柄的套筒旋具 Insulated tools up to 1000 V - Socket wrenches, spin type
281000V 以下的绝缘工具DIN 7449-1998 1000V 以下的绝缘工具.带有外四方头的棘轮 Insulated tools up to 1000 V - Ratchet handles
291000V 以下的绝缘工具DIN 7446-1998 1000V 以下的绝缘工具.单头开固定口旋具 Insulated tools up to 1000 V - Engineer wrenches, single head
301000V 以下的绝缘工具DIN 7448-1998 1000V 以下的绝缘工具.手动六角头螺钉用内四角套筒旋具组件 Insulated tools up to 1000 V - Square drive socket wrenches, hand operated
311000V 以下电压的绝缘工具DIN 7447-1998 1000V 以下电压的绝缘工具.单头高颈梅花旋具 Insulated tools up to 1000 V - Box (ring) wrenches, single end, deep offset
32DIN 48016-1970 1000V 以下架空电力线路针式绝缘子紧固用螺帽 Screwed cap for mounting pin type insulators for overhead power lines up to 1000 V
331000V交流电和1500V直流电以下的低压配电系统中的电气安全性防护措施的检验,测量和监测设备DIN EN 61557-1-1998 1000V交流电和1500V直流电以下的低压配电系统中的电气安全性.防护措施的检验,测量和监测设备.第1部分:一般要求 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements (IEC 61557-1:1997); German version EN 61557:1997
341000V交流电和1500V直流电以下的低压配电系统中的电气安全性防护措施的检验,测量和监测设备DIN EN 61557-2-1998 1000V交流电和1500V直流电以下的低压配电系统中的电气安全性.防护措施的检验,测量和监测设备.第2部分:绝缘电阻 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance (IEC 61557-2:1997); German version EN 61557-2:1997
351000V交流电和1500V直流电以下的低压配电系统中的电气安全性防护措施的检验,测量和监测设备DIN EN 61557-3-1998 1000V交流电和1500V直流电以下的低压配电系统中的电气安全性.防护措施的检验,测量和监测设备.第3部分:滑接点电阻 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance (IEC 61557-3:1997); German version EN 61557-3:1997
361000V交流电和1500V直流电以下的低压配电系统中的电气安全性防护措施的检验,测量和监测设备DIN EN 61557-4-1998 1000V交流电和1500V直流电以下的低压配电系统中的电气安全性.防护措施的检验,测量和监测设备.第4部分:接地导线,安全引线以及电位均衡导线的电阻 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding (IEC 61557-4:1997); Ge
371000V交流电和1500V直流电以下的低压配电系统中的电气安全性防护措施的检验,测量和监测设备DIN EN 61557-5-1998 1000V交流电和1500V直流电以下的低压配电系统中的电气安全性.防护措施的检验,测量和监测设备.第5部分:接地电阻 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth (IEC 61557-5:1997); German version EN 61557-5:1997
381000V交流电和1500V直流电以下的低压配电系统中的电气安全性防护措施的检验,测量和监测设备DIN EN 61557-7-1998 1000V交流电和1500V直流电以下的低压配电系统中的电气安全性.防护措施的检验,测量和监测设备.第7部分:旋转磁场 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence (IEC 61557-7:1997); German version EN 61557-7:1997
391000V交流电和1500V直流电以下的低压配电系统中的电气安全性防护措施的检验,测量和监测设备DIN EN 61557-8-1998 1000V交流电和1500V直流电以下的低压配电系统中的电气安全性.防护措施的检验,测量和监测设备.第8部分:IT网络用绝缘监测仪 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems (IEC 61557-8:1997); German version
401000V交流和1500V直流的低压分配系统的电气安全防护措施的检验,测量或者监测设备DIN EN 61557-6-1999 1000V交流和1500V直流的低压分配系统的电气安全.防护措施的检验,测量或者监测设备.第6部分:TT,TN和IT网络中故障电流的防护装置 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual current devices (RCD) in TT, TN and IT systems (IEC 61557-6:1997, modified
41DIN IEC 60273-1993 1000V以上额定电压系统用户内户外支柱绝缘子的特性 Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V (IEC 60273:1990); German version HD 578 S1:1992
421000V以下的绝缘工具DIN 7440-1998 1000V以下的绝缘工具.带T形固定手柄的套筒旋具 Insulated tools up to 1000 V - Tee handled wrenches, socket, single end
431000V以下的绝缘工具DIN 7439-1998 1000V以下的绝缘工具.内六角螺钉用旋具 Insulated tools up to 1000 V - Keys with handle for hexagon socket screws
441000V以下的绝缘工具DIN 7434-1998 1000V以下的绝缘工具.内四方和外四方加长杆 Insulated tools up to 1000 V - Extension bars
451000V以下的绝缘工具DIN 7438-1998 1000V以下的绝缘工具.十字槽螺钉用旋具 Insulated tools up to 1000 V - Screwdrivers for cross-recessed head screws
461000V以下的绝缘工具DIN 7436-1998 1000V以下的绝缘工具.外四方传动的T形柄 Insulated tools up to 1000 V - Tee handles square drive
471000V以下的绝缘工具DIN 7437-1998 1000V以下的绝缘工具.有槽螺钉用旋具 Insulated tools up to 1000 V - Screwdrivers for slotted head screws
4810KV-30KV带单个屏蔽电缆芯线的电力电缆金属铸造连接套DIN 47606-1974 10KV-30KV带单个屏蔽电缆芯线的电力电缆金属铸造连接套.保护套 Joint boxes for power cables up to 30 kV; joint protection boxes
4910KV以下电力电缆用金属铸造连接套DIN 47600-6-1974 10KV以下电力电缆用金属铸造连接套.0.6/1KV塑料绝缘电缆连接套的配置 Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Plastic Insulated Cables 0.6/1 kV
5010KV以下电力电缆用金属铸造连接套DIN 47600-7-1974 10KV以下电力电缆用金属铸造连接套.1.6/1KV塑料绝缘电缆的内部结构 Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Plastic Insulated Cables 0.6/1 kV
5110KV以下电力电缆用金属铸造连接套DIN 47600-2-1974 10KV以下电力电缆用金属铸造连接套.内套 Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Joint Boxes
5210KV以下电力电缆用金属铸造连接套DIN 47600-5-1974 10KV以下电力电缆用金属铸造连接套.纸绝缘电缆的安装说明 Cast Metal Joint Boxes for Power Cables up to 10 kV; Installation Instructions for Paper-insulated Cables
5310KV以下电力电缆用金属铸造连接套DIN 47600-4-1974 10KV以下电力电缆用金属铸造连接套.纸绝缘电缆的内部结构 Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for Paper-insulated Cables
5410KV以下电力电缆用金属铸造连接套纸绝缘电缆连接套的配置DIN 47600-3-1974 10KV以下电力电缆用金属铸造连接套.纸绝缘电缆连接套的配置.铜绞线连接的配置 Cast Metal Joint Boxes for Power Cables up to 10 kV; Correlation of Joint Boxes with Paper-insulated Cables; Correlation of Bare Stranded Copper Bonding Wire
5510和12档直径为17mm的分档旋转开关档轴向焊接开关尺寸参数要求DIN 41633-1981 10和12档直径为17mm的分档旋转开关.档轴向焊接开关.尺寸.参数.要求.试验 Rotary wafer switches 17 mm diameter; 10 and 12 positions axial soldering; dimensions, ratings, requirements and tests
5611/12GHz频带范围内卫星广播传送用接收天线DIN EN 61114-1-1999 11/12GHz频带范围内卫星广播传送用接收天线.第1部分:电测量 Receiving antennas for satellite broadcast transmissions in the 11/12 GHz band - Part 1: Electrical measurements (IEC 61114-1:1999); German version EN 61114-1:1999
57DIN 4510-1-1983 110.126和135 号胶卷静物摄影的图象尺寸和印相遮片 Picture sizes and printing masks for film No. 110, film No. 126 and film No. 135 for still photography
58110号盒式胶卷110号盒式胶卷用的照相机暗盒DIN 4528-2-1984 110号盒式胶卷.110号盒式胶卷用的照相机暗盒.胶卷感光度开关隔片和胶卷识别开关槽的尺寸和位置 Film No. 110; camera cartridge; dimensions and location of the notches for film speed and film identification
59110号盒式胶卷110号盒式胶卷用的照相机暗盒DIN 4528-1-1984 110号盒式胶卷.110号盒式胶卷用的照相机暗盒.与照相机的连接尺寸 Film No. 110; camera cartridge; connecting dimensions between camera cartridge and camera
60110号盒式胶卷DIN 4528-3-1984 110号盒式胶卷.胶片和背纸 Film No. 110; film and backing paper
61DIN 347-1962 120°埋头钻 Countersinks with 120 Point Angle
62DIN 4510-2-1992 120号和220号胶卷以及70mm胶片静物摄影的图象尺寸和照片复制框 Picture sizes and printing masks for roll films No 120, No 220 and film 70 mm
631228档mm×39mm分档旋转开关尺寸参数要求DIN 41632-1982 1228档mm×39mm分档旋转开关.尺寸.参数.要求.试验 Rotary wafer switches 28 mm 39 mm; 12 positions; dimensions, ratings, requirements, tests
641250A和2000A用等级60N和110N的户外变压器套管DIN 42535-4-1976 1250A和2000A用等级60N和110N的户外变压器套管.火花放电导体 Outdoor transformer bushings, insulation class 60 N and 110 N, for 1250 A and 2000 A; spark conductors
65125-500V交流电汽笛DIN 41096-4-1979 125-500V交流电汽笛.安全顶盖 Electric sirens for a.c. voltages from 125 to 500 V; protective shield
66125-500V交流电汽笛DIN 41096-3-1979 125-500V交流电汽笛.功率铭牌 Electric sirens for a.c. voltages from 125 to 500 V; rating plate
67125-500V交流电汽笛DIN 41096-2-1979 125-500V交流电汽笛.交货的技术条件 Electric sirens for a.c. voltages from 125 to 500 V; technical delivery terms
68125-500V交流电汽笛DIN 41096-1-1979 125-500V交流电汽笛.主要尺寸和技术参数 Electric sirens for a.c. voltages from 125 to 500 V; main dimensions and technical values
69125-500V交流电汽笛用管底座带和不带中间绝缘保护装置的标准结构DIN 41097-1-1964 125-500V交流电汽笛用管底座.带和不带中间绝缘保护装置的标准结构.部件的装配 Steel tube support for electrical siren 125-500 V a.c. standard type with and without electric protective insulation, parts list
70125-500V交流电汽笛用管底座DIN 41097-4-1968 125-500V交流电汽笛用管底座.顶盖入孔 Steel-tube support for electrical sirens 125 to 500 V; skylight
7112GHz频带的卫星广播传送接收机的测量方法DIN EN 61079-1-1994 12GHz频带的卫星广播传送接收机的测量方法.第1部分:露天设备的射频测量 Methods of measurements on receivers for satellite broadcast transmissions in the 12 GHz band; part 1: radio-frequency measurement on outdoor units (IEC 61079-1:1992); German version EN 61079-1:1993
7212GHz频带的卫星广播传送接收机的测量方法DIN EN 61079-2-1994 12GHz频带的卫星广播传送接收机的测量方法.第2部分:卫星接收机的电气测量 Methods of measurements on receivers for satellite broadcast transmissions in the 12 GHz band; part 2: electrical measurements on DBS tuner units (IEC 61079-2:1992); German version EN 61079-2:1993
7312GHz频带的卫星广播传送用接收机的测量方法DIN EN 61079-3-1993 12GHz频带的卫星广播传送用接收机的测量方法.第3部分:包括户外装置和DBS调谐装置卫星接收机和接收天线总性能电测量 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 3: electrical measurements of the overall performance of receiver systems comprising an outdoor unit and a DBS tuner unit (IEC 61079-3:1993); Ger
7412GHz频带的卫星广播接收机的测量方法DIN IEC 61079-4-1994 12GHz频带的卫星广播接收机的测量方法.第4部分:NTSC制式数字副载波系统 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band - Part 4: Electrical measurements on sound/data decoder units for the digital subcarrier NTSC system; identical with IEC 61079-4:1993
7512GHz频带卫星广播接收机的测量方法DIN EN 61079-5-1994 12GHz频带卫星广播接收机的测量方法.第5部分:MAC/包系统的译码器单元的测量方法 Methods of measurement on receivers for satellite broadcast transmissions in the 12 GHz band; part 5: electrical measurements on decoder units for MAC/packet systems (IEC 61079-5:1993); German version EN 61079-5:1993
7612档(12×31)mm.分档旋转开关与转动轴成直角的焊接开关DIN 41638-1983 12档(12×31)mm.分档旋转开关.与转动轴成直角的焊接开关.尺寸.参数.要求.检验 Rotary wafer switches (12 31) mm, 12 positions; soldering terminals, rectangular to the driving shaft; dimensions, ratings, requirements, tests
7712档直径为17mm档径向焊接分档旋转开关DIN 41634-1-1976 12档直径为17mm.档径向焊接分档旋转开关.主要尺寸 Rotary wafer switches, diameter 17 mm, 12 positions, radial soldering terminals; main dimensions
7813和26档41mm×54mm分档旋转开关尺寸参数要求DIN 41631-1982 13和26档41mm×54mm分档旋转开关.尺寸.参数.要求.试验 Rotary wafer switches 41 mm 54 mm; 13 and 26 positions; dimensions, ratings, requirements, tests
7914岁及以下儿童用书写和划线用具罩DIN ISO 11540-1994 14岁及以下儿童用书写和划线用具罩.安全要求 Caps for writing and marking instruments intended for use by children up to 14 years of age; safety requirements; identical with ISO 11540:1993
8015英寸轮圈的载重汽车用不带压入深度用6个或10个螺栓紧固的盘轮制动鼓DIN 74362-7-1987 15英寸轮圈的载重汽车用不带压入深度用6个或10个螺栓紧固的盘轮制动鼓.最大外廓 Brake drums for disc wheels with rim diameter designation 15 without offset for 6 or 10 bolt mounting, maximum outline
8115英寸轮圈的载重汽车用带有压入深度用6个或10个螺栓紧固的盘轮制动鼓DIN 74362-8-1987 15英寸轮圈的载重汽车用带有压入深度.用6个或10个螺栓紧固的盘轮制动鼓.最大外廓 Brake drums for offset disc wheels rim diameter designation 15 for 6 or 10 bolt mounting; maximum outline
82DIN 40005-1969 16 2/3-10000Hz的额定频率 Rated frequencies from 16/ to 10000 Hz (c/s)
8316ADIN 89300-1995 16A.500V额定载面2.5平方毫米以下带有垫板外壳接线柱的终端接线器 Terminal connectors with clamping-screw, 16 A, 500 V, for nominal cross-sectional areas up to 2,5 mm
8416mm磁胶片DIN 15655-4-1988 16mm磁胶片.沿一边穿孔机械和电声要求 Magnetic film 16 mm, perforated along one edge; mechanical and electroacoustic requirements
8516mm单侧穿孔磁胶片材料DIN 15655-1-1989 16mm单侧穿孔磁胶片.材料.外整饰 Magnetic film perforated along one edge; raw stock, material, outfit
8616mm单侧穿孔磁胶片DIN 15655-3-1981 16mm单侧穿孔磁胶片.带一个标记磁道的双磁道录音 Film 16 mm, magnetic film perforated along one edge; location of erasing, recording and reproducing heads for single and twin tracks
8716mm单侧穿孔胶片带磁声带的正片DIN 15681-1-1985 16mm单侧穿孔胶片.带磁声带的正片.单声道录音的正片 Film 16 mm perforated along one edge; combined print (picture with single magnetic sound track)
8816mm单侧穿孔胶片带磁条的正片DIN 15681-2-1981 16mm单侧穿孔胶片.带磁条的正片.双磁道录音用正片 Film 16 mm perforated along one edge - Combined print (picture with two magnetic sound tracks)
8916mm电影胶片电影放映机里的磁性拾音器DIN 15668-1978 16mm电影胶片.电影放映机里的磁性拾音器.测量的要求和说明 Film 16 mm; magnetic sound head, requirements and general data for measuring
9016mm电影胶片光学录音DIN 15603-1984 16mm电影胶片.光学录音.磁道位置和间隙图象 Film 16 mm; photographic sound record; track position and slit image
9116mm电影胶片图象尺寸第1部分:摄象和放象DIN 15602-1-1996 16mm电影胶片.图象尺寸.第1部分:摄象和放象.图象宽高比为1.37∶1 Film 16 mm - Part 1: Image area produced by camera aperture and projectable image area; aspect ratio 1,37 : 1
9216mm电影胶片图象尺寸第2部分:电视用显象DIN 15602-2-1996 16mm电影胶片.图象尺寸.第2部分:电视用显象.图象长宽比为1.33:1 Film 16 mm - Part 2: Projected image area for television; aspect ratio 1,33:1
9316mm电影胶片图象尺寸光学缩小复制基本尺寸影响因素DIN 15602-6-1983 16mm电影胶片.图象尺寸.光学缩小复制.基本尺寸.影响因素.图象比例 Film 16 mm; optical reduction printing; fundamental dimensions; factors of influence, scale of reduction
9416mm电影胶片粘接点16mm磁膜DIN 15653-2-1984 16mm电影胶片.粘接点.16mm磁膜.斜的用粘合带对接 Film 16 mm; dimensions of tape splices for magnetic film 16 mm, oblique
9516mm电影胶片粘接点DIN 15653-1-1999 16mm电影胶片.粘接点.第1部分:锥型搭接 Film 16 mm - Part 1: Dimensions of bevelled overlapped splices
9616mm电影胶片粘接点DIN 15653-3-1982 16mm电影胶片.粘接点.用粘合带对接 Film 16 mm; dimensions of tape splices
9716mm电影胶片照相机取景框的胶片定位DIN 15630-1982 16mm电影胶片.照相机取景框的胶片定位.标准孔位置 Film 16 mm; position of film relative to camera aperture; position of reference perforation hole
9816mm电影胶片DIN 15698-1-1978 16mm电影胶片.直接放映用片头和片尾 Film 16 mm; leader and run-out trailer for direct front projection
9916mm胶片放映胶片卷盘DIN 15621-1982 16mm胶片.放映胶片卷盘.片卷盒 Film 16 mm; motion-picture projection reels; reel containers
10016mm胶片光学录音头DIN 15666-1981 16mm胶片.光学录音头.测量要求和说明 Film 16 mm; optical sound heads, requirements and general data for measuring
10116mm胶片胶片齿轮主要尺寸DIN 15625-1984 16mm胶片.胶片齿轮.主要尺寸.圆弧形齿扇标准件 Film 16 mm; sprockets; main dimensions, arc reference profile
10216mm胶片有声电影的光录音的调制和全调制DIN 15607-1971 16mm胶片.有声电影的光录音的调制和全调制.定义和测量准则 Film 16 mm; saturation level of optical sound records
10316mm胶片有声电影放映机的功率放大器DIN 15659-1-1981 16mm胶片.有声电影放映机的功率放大器.测量的电气要求和说明 Film 16 mm - Power amplifiers for sound projectors, general data for measuring of sound-reproduction amplifiers
10416mm胶片有声电影放映机的功率放大器DIN 15659-2-1981 16mm胶片.有声电影放映机的功率放大器.磁性录音元件测量的要求和说明 Film 16 mm - Power amplifiers for sound projectors, magnetic sound recording device, requirements and general data for measuring
10516mm缩微胶卷DIN 19071-3-1990 16mm缩微胶卷.图面标记 Microfilm 16 mm; document marks (blips)
10617dianhao5mm和35mm磁胶片第1部分:DIN标准胶片BF17ADIN 15538-1-2000 17.5mm和35mm磁胶片.第1部分:DIN标准胶片BF17A.BF17F和BF35A Magnetic film 17,5 mm and 35 mm - Part 1: DIN-reference films BF 17A, BF 17F and BF 35A
10717dianhao5mm和35mm磁胶片粘接点DIN 15540-1-1981 17.5mm和35mm磁胶片.粘接点.35mm胶片的搭接片 Film 17,5 mm and film 35 mm; dimensions of splices for film 35 mm
10817dianhao5mm和35mm的磁胶片单边穿孔的17dianhao5mm磁胶片DIN 15552-3-1982 17.5mm和35mm的磁胶片.单边穿孔的17.5mm磁胶片.带一个标志磁迹的双迹录音 Magnetic film 17,5 mm and 35 mm; magnetic film 17,5 mm, perforated along one edge, location of erasing, recording and reproducing heads for single and twin tracks
10917dianhao5mm和35mm的磁胶片DIN 15552-2-1982 17.5mm和35mm的磁胶片.单迹录音 Magnetic film 17,5 mm and 35 mm; single track records
11017dianhao5mm和35mm的磁胶片DIN 15552-4-1989 17.5mm和35mm的磁胶片.机械和电声要求 Magnetic film 17,5 mm and 35 mm; mechanical and electro-acoustic requirements
11117dianhao5mm和35mm的磁胶片原片材料DIN 15552-1-1989 17.5mm和35mm的磁胶片.原片.材料.附具 Magnetic film 17,5 mm and 35 mm; raw stock, material, outfit
11217dianhao5mm和35mm胶片粘接点DIN 15540-2-1984 17.5mm和35mm胶片.粘接点.17.5mm和35mm磁胶片的粘合带斜接 Film 17,5 mm and film 35 mm; dimensions of tape splices for magnetic film 17,5 mm and magnetic film 35 mm, oblique
11317dianhao5mm胶片及35mm胶片粘接点DIN 15540-3-1982 17.5mm胶片及35mm胶片.粘接点.35mm磁胶片的粘合带对接 Film 17,5 mm and film 35 mm; dimensions of tape splices for film 35 mm
114DIN EN 50107-1998 1kV以上,不超过10kV空转电压的日光灯装置和日光灯设备 Signs and luminous-discharge-tube installations operating from a no-load output voltage exceeding 1 kV but not exceeding 10 kV; German version EN 50107:1998
1151kV以上额定电压的架空电线用绝缘子交流电系统用瓷绝缘子DIN EN 60433-1999 1kV以上额定电压的架空电线用绝缘子.交流电系统用瓷绝缘子.长棒型绝缘子串的特性值 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type (IEC 60433:1998); German version EN 60433:1998
1161KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管DIN 47632-1-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.保护套管 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; joint protection boxes
1171KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管DIN 47632-3-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.导线截面的配置 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; allocation of conductor cross sections
1181KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管DIN 47632-4-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内部结构 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal construction
1191KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管DIN 47632-2-1978 1KV以下的塑料绝缘电力电缆用热缩塑料软管的连接套管.内套管 Joint boxes of heat-shrinking plastic-hose for plastic insulated power cables up to 1000 V; internal joint boxes
120DIN VDE 0220-3-1977 1kV以下电力电缆设备中带绝缘件的单个和多个电缆接头的规范 Specifications for single- and multiple cable clamps with insulating parts in electrical power cable installations up to 1000 V
121DIN VDE 0220-1-1971 1kV以下电力电缆设备中可拆卸的电缆接头的规范 Specifications for detachable cable clamps to be used in power cable installations up to 1000 V
1221kV以下电力电缆设备中可拆卸的电缆接头的规范DIN VDE 0220-1a-1978 1kV以下电力电缆设备中可拆卸的电缆接头的规范.修订1 Specifications for detachable cable clamps to be used in power cable installations up to 1000 V; Amendment to VDE 0220 Part 1/11.71
1231KV以下金属铸造材料制室内连接套管DIN 47630-1-1972 1KV以下金属铸造材料制室内连接套管.尺寸 House junction boxes up to 1000 V; dimensions
1241KV以下金属铸造材料制室内连接套管DIN 47630-7-1972 1KV以下金属铸造材料制室内连接套管.用于NAKLEY配电电缆和NYCY室内连接电缆的安装说明 House junction boxes, up to 1000 V; installation instructions for distribution cable NAKLEY and house junction cable NYCY
1251KV以下金属铸造材料制室内连接套管DIN 47630-6-1972 1KV以下金属铸造材料制室内连接套管.用于NAKLEY配电电缆和NYCY室内连接电缆的内部结构 House junction boxes up to 1000 V; inner design for distribution cable NAKLEY and house junction cable NYCY
1261KV以下金属铸造材料制室内连接套管DIN 47630-3-1972 1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NKBA室内连接电缆的安装说明 House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NKBA
1271KV以下金属铸造材料制室内连接套管DIN 47630-2-1972 1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NKBA室内连接电缆的内部结构 House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NKBA
1281KV以下金属铸造材料制室内连接套管DIN 47630-5-1972 1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NYCY室内连接电缆的安装说明 House junction boxes up to 1000 V; installation instructions for distribution cable NKBA and house junction cable NYCY
1291KV以下金属铸造材料制室内连接套管DIN 47630-4-1972 1KV以下金属铸造材料制室内连接套管.用于NKBA配电电缆和NYCY室内连接电缆的内部结构 House junction boxes up to 1000 V; inner design for distribution cable NKBA and house junction cable NYCY
1301KV以下金属铸造材料制室内连接套管DIN 47630-9-1972 1KV以下金属铸造材料制室内连接套管.用于NYCWY配电电缆和NYCY室内连接电缆的安装说明 House junction boxes up to 1000 V; installation instruction for distribution cable NYCWY and house junction cable NYCY
1311KV以下金属铸造材料制室内连接套管DIN 47630-8-1972 1KV以下金属铸造材料制室内连接套管.用于NYCWY配电电缆和NYCY室内连接电缆的内部结构 House junction boxes up to 1000V; inner design for distribution cable NYCWY and house junction cable NYCY
1321KV以下金属铸造材料制室内连接套管DIN 47630-11-1972 1KV以下金属铸造材料制室内连接套管.用于NYY配电电缆和NYY室内连接电缆的安装说明 House junction boxes up to 1000 V; installation instruction for distribution cable NYY and house junction cable NYY
1331KV以下金属铸造材料制室内连接套管DIN 47630-10-1972 1KV以下金属铸造材料制室内连接套管.用于NYY配电电缆和NYY室内连接电缆的内部结构 House junction boxes up to 1000 V; inner design for distribution cable NYY and house junction cable NYY
1341KV以下通信和电力架空线DIN 48328-1943 1KV以下通信和电力架空线.拉线杆 Telecommunication and power current overhead lines below 1 kV; anchor logs
1351KV以下通信线路和电力架空线系杆墙板DIN 48324-1959 1KV以下通信线路和电力架空线.系杆.墙板.环形螺母 Telecommunication and power current overhead lines below 1 kV; tie bar, wall plate, lifting eye nut
1361型公制细螺纹普通扭矩六角螺母(带非金属垫片)DIN EN ISO 10512-1998 1型公制细螺纹普通扭矩六角螺母(带非金属垫片).强度等级6,8和10 Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:1997); German version EN ISO 10512:1997
1371型通用扭矩六角螺母(全金属螺母)DIN EN ISO 7719-1998 1型通用扭矩六角螺母(全金属螺母). 强度等级5,8和10 Prevailing torque type (all-metal hexagon nuts), style 1 - Property classes 5, 8 and 10 (ISO 7719:1997); German version EN ISO 7719:1997
1381型通用扭矩六角螺母(用非金属垫圈)DIN EN ISO 7040-1998 1型通用扭矩六角螺母(用非金属垫圈).强度等级5,8和10 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5, 8 and 10 (ISO 7040:1997); German version EN ISO 7040:1997
139DIN 5111-1990 2.5kg以下锤子的木锤柄 Timber handles for hammers up to 2 kg
1402/5dianhao5 HF插接连接DIN 47235-1984 2/5.5 HF插接连接.波阻抗50Ω HF-connection 2/5,5; characteristic impedance 50
141200ADIN 44767-1976 200A.550V电阻焊接变压器初级线圈插接装置 Appliance Coupling for the Primary Connection of Resistance Welding Transformers, 200 A 550 V
142DIN 5902-1-1968 20kg/m以上的钢轨 Rails over 20 kg/m
14320kg/m以上的钢轨扁平鱼尾板DIN 5902-2-1968 20kg/m以上的钢轨.扁平鱼尾板.关节形鱼尾板 Rails over 20 kg/m; flat fishplates, angle fishplates
144DIN 5901-1-1965 20kg/m以下的钢轨 Rails up to 20 kg/m
14520kg/m以下的钢轨扁平鱼尾板DIN 5901-2-1965 20kg/m以下的钢轨.扁平鱼尾板.角形鱼尾板 Rails up to 20 kg/m; Flat Fishplates, Angle Fishplates
146DIN 5908-1965 20kg/m以下用于600mm轨距的钢轨 (600 mm track rails for ties up to 20 kg/m)
147DIN 48353-1-1965 20KV以下单线线路用钢筋混凝土电线杆和横梁 Steel-concrete masts for simplex circuits up to 20 kV
148DIN 3567-1963 20至500NW的管夹 Pipe Brackets for NW 20 to 500
149DIN 3570-1968 20至500NW管用圆钢制弓形夹 Steel Strap for Tubes of NW 20 to 500
150250VDIN 49200-1987 250V.16A以下的室内布线开关 Switches up to 16 A 250 V for flush and surface mounting
     下一页
咨询: DIN  标准有关信息
电话:400 810 0369(当地市话费) ; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com ; QQ:717234393 /  517865072 / 158894832


GB 标准、各行业标准、工程招投标书中译外专业翻译
欧、美、英、德、日等国外标准外译中专业翻译

技术资料翻译,专业口译
各类技术资料翻译及专业技术人员口译服务
笔译:130-160元/千中文字
口译/商务陪同/会展翻译/现场交传/同声传译
全国热线咨询电话: 
400 810 0369(当地市话费)
北京总部:86 10 8809 7400,13601282001, 86 10 8809 7217(传真)
网址:http://www.hlyt.com

工程项目监理、监造、质量体系认证
欧洲科技服务机构,200多会员公司,几十年专业经验。
中国涉外项目技术服务、国外公司在国内承建项目监理。
项目审核施工监理、培训、检测、咨询、市场准入、中欧科研项目申报及质量管理体系认证
咨询电话: 86 10 8809 7217
E-mail: zxd@hlyt.com
网址:http://www.isqchina.com


咨询电话:400 810 0369(市话费)
QQ:717234393

国际、国内标准搜索     

   设为首页    收藏本站

 

中国标准翻译网版权所有Copyright©1999-2008
北京华联亚通网络信息技术有限公司

电话:86 10 88099016  86 10 88099435  86 10 88097400 传真:86 10 88097217
地址: 中国北京海淀区知春路49号希格玛大厦B座1605室
MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com
QQ:517865072, 717234393, 158894832
合作伙伴:中国会展服务网