TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 
Order the standard:SH/T
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com
Home Page -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
---> Previous Page
No.

SH/T  Standards:
1SH/T 1492-2004  (1-Butene for industrial use--Determination of purity and hydrocarbon impurities--Gas chromatographic method)
2SH/T 1547-2004  (1-Butene for industrial use--Determination of trace methanol and methyl tert-butyl ether--Gas chromatographic method)
3SH/T 1548-2004  (1-Butene for industrial use--Determination of trace propadiene adn propyne--Gas chromatographic method)
4SH/T 0664-1998  (321 extreme pressure additive)
5SH/T 0604-2000  (Crude petroleum and petroleum products.Determination of density.Oscillating U-tube Method
6SH/T 1687-2000  (HPCE)(Purified terephthalic acid(PTA)for industrial use.Determination of 4-carboxybenzaldehyde and p-toluic acid.High performance capillary electrophoresis(HPCE)
7SH/T 0665-1998  (Lubricants and related products (class L).Family M (metalworking ).Guidelines for establishing specifications
8SH/T 1550-2000  (Methyl tert-butyl ether(MTBE)for industrial use.Determination of purity and hydrocarbon impurities.Gas chromatographic method
9SH/T 1611-2004  Acrylonitrile-butadiene rubber(NBR)--Evaluation procedure
10SH/T 0675-1999  Air-cooling two-stroke-cycle gasoline engine oil
11SH/T 1727-2004  Butadiene rubber--Determination of microstructure by infra-red spectrometry
12SH/T 3045-2003  Calcuation of the thermal efficiency for petrochemical tubular heaters
13SH/T 3116-2000  Calculation method for electricity load design in petroleum refineries
14SH/T 3110-2001  Calculation method for energy consumption in petrochemical engineering design
15SH/T 3117-2000  Calculation Method of Thermal Medium Consumption For Refinery Engineering Design
16SH/T 3117-2000  Calculation Method of Thermal Medium Consumption for Refinery Engineering Design
17SH/T 0694-2000  Calculation of cetane index of middle-distillate fuels by the four-variable equation
18SH/T 3037-2002  Calculation of heater-tube thickness in petroleum refineries
19SH/T 3128-2002  Ceramic fibre linings of fired heaters for general refinery service
20SH/T 3092-1999  Code for the design of distributed control system for petrochemical industry
21SH/T 3104-2000  Code for the design of instrument installation for petrochemical industry
22SH/T 3527-1999  Code for the welding of stainless clad steel for petrochemical industry
23SH/T 3523-1999  Code for welding of Cr-Ni austenitic steel, Fe-Ni and Ni alloy pipe for petrochemical industry
24SH/T 0697-2000  Compatibility test of water-cooling two-stroke-cycle gasoline engine oil
25SH/T 3522-2003  Construction standard for heat insulation work in petrochemical industry
26SH/T 3515-2003  Construction standard for large-size equipment hoisting engineering
27SH/T 3530-2001  Construction technique standard for vertical cylindrical steel storage tank for petrochemical industry
28SH/T 0538-2000  Criteria for change of compress oils used in light duty rotary oil-flooded air compressor
29SH/T 1748-2004  Cumene(Isopropyibenzene) for industrial use--Determination of content of phenols and cumene hydroperoxide--High performance liquid chromatographic method
30SH/T 1746-2004  Cumene(Isopropylbenzene) for industrial use--Determination of content of peroxides--Spectrophotometric method
31SH/T 1747-2004  Cumene(Isopropylbenzene) for industrial use--Determination of phenol content--Spectrophotometric method
32SH/T 1745-2004  Cumene(Isopropylbenzene) for industrial use--Determination of purity and impurities--Gas chromatographic method
33SH/T 1744-2004  Cumene(Isopropylbenzene) for industrial use--Specification
34SH/T 1674-1999  Cyclohexane for industrial use.Determination of purity and hydrocarbon impurities.Gas chromatographic method
35SH/T 1673-1999  Cyclohexane specifications for industrial use
36SH/T 3081-2003  Design code for instrument grounding in petrochemical industry
37SH/T 3082-2003  Design code for instrument power supply in petrochemical industry
38SH/T 3019-2003  Design code for instrument tubing and wiring in petrochemical industry
39SH/T 3018-2003  Design code for safety instrumented system in petrochemical industry
40SH/T 3003-2000  Design guideline for effectively utilizing energy sources in petrochemical industry
41SH/T 3002-2000  Design guideline for energy conservation of petroleum depots
42SH/T 3122-2000  Design specification for process pipe line diagram in refinin units
43SH/T 3122-2000  Design specification for process pipe line diagram in refining units
44SH/T 3014-2002  Design specification for pump room of storage and handling system in petrochemical engineering
45SH/T 3132-2002  Design specification for reinforced concrete tanks in petrochemical industry
46SH/T 3032-2002  Design specification for site plan in petrochemical engineering
47SH/T 3040-2002  Design specification of tracing piping and jacket piping for petrochemical industry
48SH/T 3102-2000  Design symbols for heating, ventilation and air conditioning in petrochemical industry
49SH/T 0667-1998  Detergency test procedure for evaluating air-cooled two-stroke gasoline engine oils
50SH/T 0124-2000  Determination of oxidation stability of inhibited turbine oils
51SH/T 0700-2000  Determination of rust-prevention characteristics of lubricating greases
52SH/T 0304-1999  Electrical insulating oils.Detection of corrosive sulfur
53SH/T 3113-2000  Engineering specification for burners of petrochemical tubular fired heater
54SH/T 3114-2000  Engineering specification for heat resistant iron castings of petrochemical tubular fired heater
55SH/T 3115-2000  Engineering specification for light weight castable lining in petrochemical tubular fired heater
56SH/T 3112-2000  Engineering specification for tube rolling connection of petrochemical tubular fired heater
57SH/T 0730-2004  Estimation of molecular weigh (relative molecular mass) of petroleum oils from viscosity measurements
58SH/T 0669-1998  Exhaust system blocking test procedure for evaluating air-cooled two-stroke gasoline engine oils
59SH/T 3053-2002  General plot plan design code of petrochemical enterprises
60SH/T 0677-1999  Heat transfer fluids
61SH/T 0680-1999  Heat transfer fluids.Determination of thermal stability
62SH/T 3105-2000  Instrument location plan symbols and alphabet code for refinery
63SH/T 3138-2003  Integrated forging reinforcement for spherical tanks
64SH/T 1484-2004  Isobutene for industrial use--Determination of dimer of isobutene--Gas chromatographic method
65SH/T 1483-2004  Isobutene for industrial use--Determination of oxy-compounds--Gas chromatographic method
66SH/T 1482-2004  Isobutene for industrial use--Determination of purity and hydrocarbon impurities--Gas chromatographic method
67SH/T 1726-2004  Isobutene for industrial use--Specification
68SH/T 3124-2001  Legend of water supply and drainage process flow in petrochemical industry
69SH/T 3536-2002  Lifting Construction Specification for Petrochemical Engineering
70SH/T 0685-1999  Liquified petroleum gases.Determination of density.Pressure density bottle method
71SH/T 0645-1997  Lubricants test method for determination of detergence of diesel engine.Hot tube method
72SH/T 0648-1997  Lubricants test method for evaluating detergence and general performance of water-cooled two-stroke gasoline engine
73SH/T 0646-1997  Lubricants test method for evaluating exhaust gas smoke of air-cooled two-stroke gasotine engine
74SH/T 0647-1997  Lubricants test method for evaluating preignition tendency of water-cooled two-stroke gasoline engine
75SH/T 0641-1997  Lubricating greases for electric contacting point
76SH/T 0643-1997  Lubricating greases.Determination of resistance to water spray
77SH/T 0668-1998  Lubricity test procedure for evaluating air-cooled two-stroke gasoline engine oils
78SH/T 0649-1997  Marine lubricating oils.Test method of corrosiveness
79SH/T 3096-2001  Material selection guideline for design of major equipment in key units processing sour crude oil
80SH/T 3129-2002  Material selection guideline for design of major piping in key units processing sour crude oil
81SH/T 0662-1998  Mineral oil.Determination of ultraviolet absorbance
82SH/T 1498.1-1997  Nylon 66 salt
83SH/T 1498.4-1997  Nylon 66 salt.Determination content of pseudo nitric acid
84SH/T 1498.2-1997  Nylon 66 salt.Determination of ash
85SH/T 1498.6-1997  Nylon 66 salt.Determination of content of nitrates.Spectrophotometric method
86SH/T 1498.5-1997  Nylon 66 salt.Determination of content of pseudo diaminocyclohexane.Ultraviolet spectrophotometric method
87SH/T 1498.3-1997  Nylon 66 salt.Determination of content of total volatile bases
88SH/T 1498.7-1997  Nylon 66 salt.Determination of UV index.Ultraviolet spectrophotometric method
89SH/T 3123-2001  Petrochemical monitoring code for controlled water test to preload steel storage tanks subgrade
90SH/T 0642-1997  Petroleum and petrochemical products.Determination of autoignition temperature
91SH/T 0652-1998  Petroleum asphalt terminology
92SH/T 0522-2000  Petroleum asphalts for road pavement
93SH/T 0688-2000  Petroleum products and lubricants.Determination of base number.Potentiometric titration method
94SH/T 0109-2004  Petroleum products and lubricants--Determination of water washout characteristics of lubricating greases
95SH/T 1486-1998  Petroleum p-xylene
96SH/T 1489-1998  Petroleum p-xylene.Determination of purity and hydrocarbon impurities.Gas chromatographic method
97SH/T 0653-1998  Petroleum waxes.Determination of carbon number distribution of normal paraffin and non-normal paraffin hydrocarbons.Gas chromatography
98SH/T 0734-2003  Polymer modified asphalt cement for use in pavement construction
99SH/T 3512-2002  Procedure Code for Construction of Spherical Tanks
100SH/T 1499.1-1997  Pure adipic acid
101SH/T 1499.4-1997  Pure adipic acid.Determination of ash
102SH/T 1499.6-1997  Pure adipic acid.Determination of content of iron.Simple method
103SH/T 1499.5-1997  Pure adipic acid.Determination of content of iron-2,2¡ä-Bipyridyl spectrophotometric method
104SH/T 1499.7-1997  Pure adipic acid.Determination of content of nitric acid.Spectrophotometric method
105SH/T 1499.8-1997  Pure adipic acid.Determination of content of oxidizable compounds.Titrimetric method
106SH/T 1499.2-1997  Pure adipic acid.Determination of content.Titrimetric method
107SH/T 1499.3-1997  Pure adipic acid.Measurement of ammonia solution colour(in Pt-Co scale).Spectrophotometric method
108SH/T 1499.9-1997  Pure adipic acid.Measurement of melt colour (in Pt-Co scale)
109SH/T 1157-1997  Rubber,acrylonitrile-butadiene.Determination of bound acrylonitrile content
110SH/T 1743-2004  Rubber,ethylene-propylene-diene(EPDM)-Evaluation procedure
111SH/T 0692-2000  Rust preventive oils
112SH/T 0215-1999  Rust preventive oils and greases.Determination of precipitation number and wearability
113SH/T 0217-1998  Rust preventive oils and greases.Evaluation of rusting grade
114SH/T 0211-1998  Rust preventive oils and greases.Test method of low temperature adhesive property
115SH/T 0212-1998  Rust preventive oils and greases.Test method of removability
116SH/T 0214-1998  Rust preventive oils and greases.Test method of separating stability
117SH/T 0025-1999  Rust preventive oils-Test method of salt water immersion
118SH/T 1626-1996  SBR)1712
119SH/T 0698-2000  Sealed glass tube method to test chemical stability of refrigerator oils for use within refrigerant systems
120SH/T 3131-2002  Seismic design specification for electrical equipment in petrochemical industry
121SH/T 0361-1998  Slide ways oil
122SH/T 3133-2002  Specification for cartographic symbols of present maps in petrochemical engineering
123SH/T 3120-2000  Specification for design of jet mixer for petrochemical
124SH/T 3118-2000  Specification for design of steam-Jet vacuum pump for petrochemical
125SH/T 3119-2000  Specification for design of steel double pipe heat exchangers for petrochemical
126SH/T 0316-1998  Specification for petroleum hydrometer
127SH/T 3414-1999  Specification for selection, inspection and acceptance of bottom sampler for vertical steel light oil tanks in petrochemical industry
128SH/T 3412-1999  Specification for selection, inspection and acceptance of metallic hose for piping in petrochemical industry
129SH/T 3413-1999  Specification for selection, inspection and acceptance of pipeline flame arresters for petroleum gas in petrochemical industry
130SH/T 3064-2003  Specification for selection, inspection and acceptance of steel valves used in petrochemical industry
131SH/T 3411-1999  Specification for selection, inspection and acceptance of strainer for pump in petrochemical industry
132SH/T 3535-2002  Specification for the construction and acceptance of concrete water pit engineering for petrochemical industry
133SH/T 3121-2000  Specification of process design in petroleum processing units
134SH/T 3109-2001  Specifications for design of additive facilities in refineries
135SH/T 3108-2000  Specifications for design of plant-wide process and thermal piping of refineries
136SH/T 3108-2000  Specifications for design of plant-wide process and thermal piping of refineries
137SH/T 3107-2000  Specifications for the design of tankcar loading and unloading facilities liquid stocks in petrochemical industry
138SH/T 3130-2002  Standard for seismic appraiser of building in petrochemical industry
139SH/T 0521-1999  Standard specification for ethylene glycol base engine coolant for automobile and light duty service
140SH/T 0422-2000  Standard test method for ash in bitumen
141SH/T 0749-2004  Standard test method for determination of additive elements in both lubricating oils and additives by inductively coupled plasma atomic emission spectrometry
142SH/T 0693-2000  Standard test method for determination of benzene,toluene,ethylbenzene,p/m-xylene,o-xylene,C9 and heavier aromatics,and total aromatics in finished gasoline by gas chromatography
143SH/T 0663-1998  Standard test method for determination of certain alcohols and ethers in gasoline by gas chromatography
144SH/T 0741-2004  Standard test method for determination of hydrocarbon types composition in gasoline by multidimensional gas chromatography
145SH/T 0670-1998  Standard test method for determination of lubricity of water-cooled two-stroke gasoline engine oils
146SH/T 0689-2000  Standard test method for determination of total sulfur in light hydrocarbons,motor fuels and oils by ultraviolet fluorescence
147SH/T 0691-2000  Standard test method for determining the effect of lubricants on swelling property of synthetic rubbers
148SH/T 0690-2000  Standard test method for distillate fuel storage stability at 43¡æ
149SH/T 0736-2003  Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test)
150SH/T 0737-2003  Standard test method for elastic recovery of bituminous materials by ductilometer
     Next Page
Order the standard:SH/T
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com

Sponsored Links
Chinese Translation Service
Documents Translation, Chinese-English
Language, Conference/Simultaneous Interpreter
Contact US: 86 10 8809 7400
E-mail: anny@hlyt.com
URL:http://www.hlyt.com/english/hlyt.htm

Engineering Project Service in China
Project Bidding, Information Service, Market
research, Quality Assurance Services, Non
Destructive Testing, Consultancy, Testing and
Training , R & D, Investing... IN CHINA
Contact ISQ-China: 86 10 8809 7217
E-mail: zxd@hlyt.com
URL:http://www.isq.pt
 
TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 

Copyright conserved by Chinese standard translation.net©1999-2008
Technology support by Beijing Hualian-Yatong Network Information Technology Co.,LTD
Tel£º86 10 88099016 88097400 Fax£º86 10 88097217
Address£ºRoom 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing