TEL: 86 10 8809 9016
MSN: selina2ycx@hotmail.com
Chinese Standards Search  
 Chinese Version 
Google Ads:
Order the standard:QJ
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com
Home Page -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
---> Previous Page
No.

QJ  Standards:
1QJ 899-1985  (488 Digital Interface for Programmable Instrumentation)
2QJ 2815-1996  (Technical requirement for Aerospace Vehicle Integrated Design hehao Manufacture (AVIDM) system analysis
3QJ 422-1978  1:30锥体塞规(D=13～32)
4QJ 423-1978  1:30锥体套规(D=13～32)
5QJ 428-1978  1:50圆锥销孔锥体塞规(D=1～10)
6QJ 429-1978  1:50圆锥销锥度卡规(D=1～10)
7QJ 427-1978  1:50锥度卡规(D=2.5～24)
8QJ 426-1978  1:50锥体塞规(D=2.5～24)
9QJ 424-1978  7:24锥体塞规(D=31.75～107.95)
10QJ 425-1978  7:24锥体套规(D=31.75～107.95)
11QJ 3134-2001  Aerospace-polytetrafluoethylene hose assemblies-test methods
12QJ 3026-1998  CLassification for software anomalies
13QJ 1544A-1996  Defect,nonconformity,failure and hazard classiffication for astronautical product
14QJ 1947-1990  Definitions of terms for antennas
15QJ 3144-2002  Determination for hazard classification and safe distance of composite solid propellant workshop building
16QJ 2065-1991  Electrolytic machining terminology
17QJ 2828-1996  Electronic assembly terms
18QJ 3154-2002  Electrotechnical drawings fundamental norms and management requirments of computer aided design
19QJ 1563-1988  Energy management terminology
20QJ 3147.1-2002  Flat washers-Part1:General specification
21QJ 3147.2-2002  Flat washers-Part2:Plain flat washers
22QJ 3147.3-2002  Flat washers-Part3:Chamfered flat washers
23QJ 3137-2001  General specification for corrugated hose assemblies of missile (or rocket)
24QJ 3158-2002  General specification for infrared localizer on ground and warship
25QJ 3143-2001  General specification for solid rivets
26QJ 1893-1990  Ground guidance station display symbology
27QJ 3145-2002  Guideline for data base construction of the tri-zation of space products
28QJ 3161-2002  Guideline for redundancy design of surface to air missile weapon system
29QJ 3153-2002  Guideline of design technology for missile storage reliability
30QJ 3138-2001  Guideline of environmental stress screening for aerospace products
31QJ 3132-2001  Guidelines for drafting design documents of aerospace products
32QJ 2964-1997  HYdraulic fluid power.Valves controlling flow and pressure.Test methods
33QJ 3124-2000  Maintainability assurance requirements for aerospace product
34QJ 3152-2002  Management requirements for new electronic components of aerospace application
35QJ 921-1985  METAL CHEMICAL MILLING TERMINOLOGY
36QJ 1212-1987  Method of insertion loss measurementsfor passive radio interference filter units
37QJ 3159.1-2002  Method of test data processing for missile used turbojet-Part1:Stand bed test
38QJ 3159.2-2002  Method of test data processing for missile used turbojet-Part2:High altitude simulation test
39QJ 3159.3-2002  Method of test data processing for missile used turbojet-Part3:Flight test
40QJ 3139-2001  Methods and procedures for hazard analysis
41QJ 2482-1993  Nomenclature of composite solid propellant and charge
42QJ 1294-1987  Paremeters and symbols of guidedmissile flight dynamics
43QJ 3146.1-2002  Plain nuts and slotted nuts-Part 1:General specification
44QJ 3146.2-2002  Plain nuts and slotted nuts-Part2:Hexagonal plain nuts
45QJ 3146.3-2002  Plain nuts and slotted nuts-Part3:Hexagonal reduced height plain nuts
46QJ 3146.4-2002  Plain nuts and slotted nuts-Part4:Hexagonal slotted nuts
47QJ 3146.5-2002  Plain nuts and slotted nuts-Part5:Hexagonal slotted reduced height nuts
48QJ 3162-2002  Process specification for assembly of tactical missile
49QJ 3133-2001  Project phasing and planning for space products
50QJ 3160-2002  Railway transportation test method for solid rocket motors
51QJ 3126-2000  Requirements for aerospace software product assurance
52QJ 3163-2002  Requirements for general design of anti-ship missile weapon system
53QJ 1717A-2001  Requirements for preparation of quality record sheets in production process
54QJ 3141-2001  Rivnuts
55QJ 3149-2002  Safety rules for hoisting of liquid rocket engine
56QJ 2814-1996  SCPI)
57QJ 1136A-2002  Shock test method for solid rocket motors
58QJ 2345-1992  Software reliability andmaintainability management
59QJ 3142-2001  Solid rivets
60QJ 2630.4-1996  Space encironment test methods for satellite components.Megnetic test
61QJ 3125-2000  Space product assurance requirments for materials,mechanical parts and processes
62QJ 3151-2002  Space systems-Ground support equipment for use at launch,landing or retrieval sites-General requirements
63QJ 502A-2001  Specification for aluminium alloy and copper alloy forgings
64QJ 3128-2001  Specification for devlopment of space project software
65QJ 1659-1989  Specification for experiments oncontrol system simulation
66QJ 3131-2001  Specification for the pot bath and quenching medium for heat treatment
67QJ 3129-2001  Specification of software requirements analysis for space products
68QJ 3156-2002  Stress test method for large structure of missile ground equipment
69QJ 3150-2002  Technical requirements for earth observation satellite to remote-sensing ground station
70QJ 3148-2002  Technical requirements for riveting of steel lockbolts
71QJ 2222-1992  Terminology for Target and Transmission Characteristics.Part of Microwave
72QJ 2632-1994  Terminology for Target and transmission Characteristics.Part of Optics
73QJ 3155-2002  The compilatory regulation for adjustment process of space electronic product
74QJ 3135-2001  The environmental engineering program for missile weapon system,launch vehicle,and spacecraft
75QJ 2935-1997  The generation and test of random munber
76QJ 3127-2000  The guidance for reliability growth test of aerospace product
77QJ 3136-2001  The preparation,assembly and mounting of RF coaxial cables
78QJ 3157-2002  The process specification for NC machining of structural component of space product
79QJ 1474-1988  Thermal Desigh Criteria of Electromic Installations
80QJ 3123-2000  Vacuum leaks detection method by helium mass spectrometer
81QJ 1135A-2002  Vibration test method for solid rocket motors
82QJ 3121-2000  Work breakdown structures for space products projects
83QJ 1150-1987  Working procedure for products storage test
84QJ 402-1978  端面反锪钻(D=14～40)
85QJ 354-1978  高速钢浮动粗镗刀(D=50～240)
86QJ 355-1978  高速钢浮动精镗刀(D=50～240)
87QJ 1159.6-1987  光滑极限量规型式尺寸单头带护板非全形塞规(D＞180～315)
88QJ 1159.5-1987  光滑极限量规型式尺寸单头钢球固定式非全形塞规(D＞80～180)
89QJ 1159.4-1987  光滑极限量规型式尺寸单头钢球固定式圆柱塞规(D＞65～120)
90QJ 1160.4-1987  光滑极限量规型式尺寸单头圆片形卡规(D＞10～80)
91QJ 1160.6-1987  光滑极限量规型式尺寸单头圆片形卡规(D＞120～250)
92QJ 1160.5-1987  光滑极限量规型式尺寸单头圆片形卡规(D＞80～120)
93QJ 1159.8-1987  光滑极限量规型式尺寸球端杆规(D＞120～500)
94QJ 1159.3-1987  光滑极限量规型式尺寸双头钢球固定式圆柱塞规(D＞50～120)
95QJ 1159.7-1987  光滑极限量规型式尺寸双头片状塞规(D＞80～250)
96QJ 1159.1-1987  光滑极限量规型式尺寸双头针式塞规(D＜1)
97QJ 1159.2-1987  光滑极限量规型式尺寸双头锥度锁紧式圆柱塞规(D=1～50)
98QJ 1160.2-1987  光滑极限量规型式尺寸双头组合卡规(D≤3)
99QJ 1160.1-1987  光滑极限量规型式尺寸圆柱环规(D=1～100)
100QJ 1870-1990  环氧树脂分子量及其分布测试方法(GPC法)
101QJ 346-1978  盲孔用二齿平刃直柄扩孔钻(D=3～10)
102QJ 347-1978  盲孔用直柄扩孔钻(D=5～15)
103QJ 348-1978  盲孔用锥柄扩孔钻(D=12～32)
104QJ 352-1978  盲孔用锥柄硬质合金扩孔钻(D=12～32)
105QJ 1163.2-1987  深度、高度、长度极限量规型式尺寸长度卡规(L=10～500)
106QJ 1163.3-1987  深度、高度、长度极限量规型式尺寸长度刻线量规(L=3～250)
107QJ 1163.1-1987  深度、高度、长度极限量规型式尺寸带柄长度卡规(L=3～120)
108QJ 1163.5-1987  深度、高度、长度极限量规型式尺寸单肩高度量规(L=1～20)
109QJ 1163.9-1987  深度、高度、长度极限量规型式尺寸端面环形槽卡规(B=10～315)
110QJ 1163.10-1987  深度、高度、长度极限量规型式尺寸端面环形槽塞规(B=18～315)
111QJ 1163.7-1987  深度、高度、长度极限量规型式尺寸高度卡规(L=3～60)
112QJ 1163.4-1987  深度、高度、长度极限量规型式尺寸高度量规(L=1～315)
113QJ 1163.6-1987  深度、高度、长度极限量规型式尺寸高度量规(L=1～50)
114QJ 1163.14-1987  深度、高度、长度极限量规型式尺寸深度量规(L=1～180)
115QJ 1163.8-1987  深度、高度、长度极限量规型式尺寸手柄式槽宽塞规(B=0.1～3)
116QJ 1163.13-1987  深度、高度、长度极限量规型式尺寸双头片式槽宽塞规(B=2～315)
117QJ 1163.15-1987  深度、高度、长度极限量规型式尺寸游标深度量规(L=1～260)
118QJ 393-1978  套装式平底锪钻(D=33～52)
119QJ 394-1978  套装式平底锪钻用刀杆(D=30～40)
120QJ 345-1978  通孔用套装扩孔钻(D=32～60)
121QJ 351-1978  通孔用套装硬质合金扩孔钻(D=32～60)
122QJ 350-1978  通孔用硬质合金扩孔钻(D=12～32)
123QJ 343-1978  通孔用直柄扩孔钻(D=8～15)
124QJ 344-1978  通孔用锥柄扩孔钻(D=12～32)
125QJ 2314-1992  通用槽形弯曲模(L≤1200mm)
126QJ 2314.4-1992  通用槽形弯曲模(L≤1200mm)凹模
127QJ 2314.6-1992  通用槽形弯曲模(L≤1200mm)顶杆
128QJ 2314.5-1992  通用槽形弯曲模(L≤1200mm)顶件块
129QJ 2314.7-1992  通用槽形弯曲模(L≤1200mm)定位板
130QJ 2314.3-1992  通用槽形弯曲模(L≤1200mm)上模座
131QJ 2315.2-1992  通用槽形弯曲模(L≤1200mm)凸模
132QJ 2314.1-1992  通用槽形弯曲模(L≤1200mm)下模座
133QJ 2315-1992  通用槽形弯曲模(L≤2000mm)
134QJ 2315.4-1992  通用槽形弯曲模(L≤2000mm)凹模
135QJ 2315.6-1992  通用槽形弯曲模(L≤2000mm)顶杆
136QJ 2315.5-1992  通用槽形弯曲模(L≤2000mm)顶件块
137QJ 2315.7-1992  通用槽形弯曲模(L≤2000mm)定位板
138QJ 2315.3-1992  通用槽形弯曲模(L≤2000mm)上模座
139QJ 2315.1-1992  通用槽形弯曲模(L≤2000mm)下模座
140QJ 2312-1992  通用槽形弯曲模(L≤220mm)
141QJ 2312.4-1992  通用槽形弯曲模(L≤220mm)凹模
142QJ 2312.5-1992  通用槽形弯曲模(L≤220mm)顶件块
143QJ 2312.9-1992  通用槽形弯曲模(L≤220mm)键
144QJ 2312.3-1992  通用槽形弯曲模(L≤220mm)模柄
145QJ 2312.10-1992  通用槽形弯曲模(L≤220mm)拼块
146QJ 2312.2-1992  通用槽形弯曲模(L≤220mm)凸模
147QJ 2312.1-1992  通用槽形弯曲模(L≤220mm)下模座
148QJ 2312.6-1992  通用槽形弯曲模(L≤220mm)卸料螺钉
149QJ 2312.8-1992  通用槽形弯曲模(L≤220mm)右定位板
150QJ 2312.7-1992  通用槽形弯曲模(L≤220mm)左定位板
     Next Page
Order the standard:QJ
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com

Sponsored Links
Chinese Translation Service
Documents Translation, Chinese-English
Language, Conference/Simultaneous Interpreter
Contact US: 86 10 8809 7400
E-mail: anny@hlyt.com
URL:http://www.hlyt.com/english/hlyt.htm

Engineering Project Service in China
Project Bidding, Information Service, Market
research, Quality Assurance Services, Non
Destructive Testing, Consultancy, Testing and
Training , R & D, Investing... IN CHINA
Contact ISQ-China: 86 10 8809 7217
E-mail: zxd@hlyt.com
URL:http://www.isq.pt
 
TEL: 86 10 8809 9016
MSN: selina2ycx@hotmail.com
Chinese Standards Search  
 Chinese Version 

Copyright conserved by Chinese standard translation.net©1999-2008
Technology support by Beijing Hualian-Yatong Network Information Technology Co.,LTD
Tel：86 10 88099016 88097400 Fax：86 10 88097217
Address：Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing