TEL:   86 10 88099016
MSN: gbstandard@hotmail.com
Chinese Standards Search        Disclaimer
 Chinese Version
 
 
 
Order the standard:ISO/TR
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com 
Home Page -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
---> Previous Page
No.

ISO/TR  Standards:

301ISO/TR 22521-2005  Portable hand-held forestry machines -- Vibration emission values at the handles -- Comparative data in 2002(available in English only
302ISO/TR 9165-1988  Practical thermal properties of building materials and products
303ISO/TR 15235-2001  Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
304ISO/TR 10158-1991  Principles and rationale underlying calculation methods in relation to fire resistance of structural elements
305ISO/TR 3956-1975  Principles of structural fire-engineering design with special regard to the connection between real fire exposure and the heating conditions of the standard fire-resistance test (ISO 834)
306ISO/TR 1896-1991  Products in fibre-reinforced cement; non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection
307ISO/TR 9547-1988  Programming language processors; test methods; guidelines for their development and acceptability
308ISO/TR 11610-2004  Protective clothing - Vocabulary
309ISO/TR 11444-1995  Quality of sawn woods used for the construction of pallets
310ISO/TR 8452-1992  Raw tobacco; determiniation of chlorophyll residues content (green index)
311ISO/TR 11925-1-1999  Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame - Part 1: Guidance on ignitability
312ISO/TR 5658-1-1997  Reaction to fire tests - Spread of flame - Part 1: Guidance on flame spread
313ISO/TR 9705-2-2001  Reaction-to-fire tests - Full-scale room tests for surface products - Part 2: Technical background and guidance
314ISO/TR 5660-3-2003  Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 3: Guidance on measurement
315ISO/TR 9790-1999  Road vehicles - Anthropomorphic side impact dummy - Lateral impact response requirements to assess the biofidelity of the dummy
316ISO/TR 10305-1-2003  Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies 0 Hz
317ISO/TR 10305-2-2003  Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
318ISO/TR 13214-1996  Road vehicles - Child restraint systems - Compilation of regulations and standards
319ISO/TR 15031-2-2004  Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 2: Terms, definitions, abbreviations and acronyms
320ISO/TR 11842-1997  Road vehicles - Comparison of statutory photometric requirements in various countries for lighting devices
321ISO/TR 12351-1999  Road vehicles - Determination of head contact and duration in impact tests
322ISO/TR 15497-2000  Road vehicles - Development guidelines for vehicle based software
323ISO/TR 12349-1-1999  Road vehicles - Dummies for restraint system testing - Part 1: Adult dummies
324ISO/TR 12349-2-1999  Road vehicles - Dummies for restraint system testing - Part 2: Child dummies
325ISO/TR 15409-2002  Road vehicles - Heat rating of spark plugs
326ISO/TR 7861-2003  Road vehicles - Injury risk curves for evaluation of occupant protection in frontal impact
327ISO/TR 12350-2004  Road vehicles - Injury risk curves for evaluation of occupant protection in side impact
328ISO/TR 8357-1996  Road vehicles - Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicles identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes
329ISO/TR 15766-2000  Road vehicles - Pedestrian protection - Targets for the assessment of the biofidelity of the pedestrian-leg test devices
330ISO/TR 13219-1995  Road vehicles - Risk of thoracic injury associated with Hybrid III sternal deflection due to shoulder belt loading
331ISO/TR 9310-1987  Road vehicles -- Smoke measurement of compression-ignition (diesel) engines -- Survey of short in-service tests
332ISO/TR 12343-1997  Road vehicles - Symbols for electrotechnical diagrams
333ISO/TR 14645-1998  Road vehicles - Test procedures for evaluating child restraint system interactions with deploying air bags
334ISO/TR 14933-2001  Road vehicles - Test procedures for evaluating occupant interactions with deploying side impact airbags
335ISO/TR 10982-1998  Road vehicles - Test procedures for evaluation out-of-position vehicle occupant interactions with deploying air bags
336ISO/TR 7628-2-1986  Road vehicles -- Thermoplastics tubing for use in air braking systems -- Part 2: Installation on the vehicle and test methods
337ISO/TR 7882-1986  Road vehicles; Brake linings; Determination of thermal conductivity by guarded hot-plate apparatus
338ISO/TR 4114-1979  Road vehicles; Caravans and light trailers; Static load on ball couplings
339ISO/TR 9819-1991  Road vehicles; comparison tables of regulations on photometric requirements of light signalling devices
340ISO/TR 9511-1991  Road vehicles; driver hand-control reach; in-vehicle checking procedure
341ISO/TR 6546-1979  Road vehicles; Information core appropriate to the field study of accidents in which seat belts are used
342ISO/TR 10603-1992  Road vehicles; legal situation concerning lighting and light-signalling devices
343ISO/TR 8725-1988  Road vehicles; transient open-loop response test method with one period of sinusoidal input
344ISO/TR 8726-1988  Road vehicles; transient open-loop response test method with pseudo-random steering input
345ISO/TR 17784-2003  Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel
346ISO/TR 11340-1994  Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems
347ISO/TR 9272-1986  Rubber and rubber products; Determination of precision for test method standards
348ISO/TR 6809-1996  Rubber compounding ingredients - Carbon black - Standard reference blacks
349ISO/TR 8942-1988  Rubber compounding ingredients; carbon black; determination of individual pellet crushing strength
350ISO/TR 8354-1987  Rubber hoses and hose assemblies for underground mining; Textile-reinforced air and water type
351ISO/TR 7621-1982  Rubber or plastics covered rollers; Enquiries and orders; Recommendations for technical information to be supplied by purchaser
352ISO/TR 8517-1988  Rubber- or plastics-covered rollers; glossary
353ISO/TR 13763-1994  Safety and performance criteria for seamless gas cylinders
354ISO/TR 13763 Technical Corrigendum 1-1996  Safety and performance criteria for seamless gas cylinders; Technical Corrigendum 1
355ISO/TR 18569-2004  Safety of machinery - Guidelines for the understanding and use of safety of machinery standards
356ISO/TR 13849-100-2000  Safety of machinery - Safety-related parts of control systems - Part 100: Guidelines for the use and application of ISO 13849-1
357ISO/TR 12100-1-1992  Safety of machinery; basic concepts, general principles for design; part 1: basic terminology, methodology
358ISO/TR 12100-2-1992  Safety of machinery; basic concepts, general principles for design; part 2: technical principles and specifications
359ISO/TR 4826-1979  Sealed radioactive sources; Leak test methods
360ISO/TR 15069-1997  Series 1 freight containers - Handling and securing - Rationale for ISO 3874 Annex A
361ISO/TR 15070-1996  Series 1 freight containers - Rationale for structural test criteria
362ISO/TR 14564-1995  Shipbuilding and marine structures - Marking of escape routes
363ISO/TR 6065-1991  Shipbuilding and marine structures; inflatable liferafts; materials
364ISO/TR 13298-1998  Ships and marine technology - Vocabulary of general terms
365ISO/TR 14321-1997  Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
366ISO/TR 11447-1994  Small craft - Interchangeability dimensions of navigation lights
367ISO/TR 4558-1985  Small craft; Rigging screws for stainless steel wire rope; Principal dimensions for forks, connection pins and eye-holes
368ISO/TR 7596-1982  Socketing procedures for wire ropes; Resin socketing
369ISO/TR 11046-1994  Soil quality - Determination of mineral oil content - Method by infrared spectrometry and gas chromatographic method
370ISO/TR 9901-1990  Solar energy; field pyranometers; recommended practice for use
371ISO/TR 10217-1989  Solar energy; water heating systems; guide to material selection with regard to internal corrosion
372ISO/TR 12596-1995  Solar heating - Swimming-pool heating systems - Dimensions, design and installation guidelines
373ISO/TR 12596 Technical Corrigendum 1-1996  Solar heating - Swimming-pool heating systems - Dimensions, design and installation guidelines; Technical Corrigendum 1
374ISO/TR 5307-1991  Solid fertilizers; derivation of a sampling plan for the evaluation of a large delivery
375ISO/TR 17400-2003  Space systems - Space launch complexes, integration sites and other facilities - General testing guidelines
376ISO/TR 15510-1997  Stainless steels - Chemical composition
377ISO/TR 10652-1991  Standard sizing systems for clothes
378ISO/TR 17055-2002  Steel - Determination of silicon content - Inductively coupled plasma atomic emission spectrometric method
379ISO/TR 10719-1994  Steel and iron - Determination of non-combined carbon content - Infrared absorption method after combustion in an induction furnace
380ISO/TR 9769-1991  Steel and iron; review of available methods of analysis
381ISO/TR 15461-1997  Steel forgings - Testing frequency, sampling conditions and test methods for mechanical tests
382ISO/TR 4949-1989  Steel names based on letter symbols
383ISO/TR 10108-1989  Steel; conversion of hardness values to tensile strength values
384ISO/TR 4830-4-1978  Steel; Determination of low carbon contents; Part IV : Coulometric method after combustion
385ISO/TR 15844-1998  Sterilization of health care products - Radiation sterilization - Selection of sterilization dose for a single production batch
386ISO/TR 7468-1981  Summary of average stress rupture properties of wrought steels for boilers and pressure vessels
387ISO/TR 896-1977  Surface active agents; Scientific classification
388ISO/TR 19319-2003  Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Determination of lateral resolution, analysis area, and sample area viewed by the analyser(available in English only
389ISO/TR 15969-2001  Surface chemical analysis - Depth profiling - Measurement of sputtered depth
390ISO/TR 5460-1985  Technical drawings; Geometrical tolerancing; Tolerancing of form, orientation, location and run-out; Verification principles and methods; Guidelines
391ISO/TR 8545-1984  Technical drawings; Installations; Graphical symbols for automatic control
392ISO/TR 19033-2000  Technical product documentation - Metadata for construction documentation
393ISO/TR 13567-3-1999  Technical product documentation - Organization and naming of layers for CAD - Part 3: Application of ISO 13567-1 and ISO 13567-2
394ISO/TR 10623-1991  Technical product documentation; requirements for computer-aided design and draughting; vocabulary
395ISO/TR 11295-1992  Techniques for rehabilitation of pipeline systems by the use of plastics pipes and fittings
396ISO/TR 230-9-2005  Test code for machine tools -- Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
397ISO/TR 3814-1989  Tests for measuring "reaction-to-fire" of building materials; their development and application
398ISO/TR 4918-1990  Textile floor coverings; determination of wear; castor chair test
399ISO/TR 6131-1986  Textile floor coverings; Tetrapod Walker apparatus; Constructional details and instructions for use
400ISO/TR 14510-1997  Textiles - Industrial laundering procedures for textile rental and industrial laundering
401ISO/TR 16323-2003  Textiles -- Three-dimensional measuring apparatus for fabric appearance
402ISO/TR 9240-1992  Textiles; design of apparel for reduced fire hazard
403ISO/TR 6741-4-1987  Textiles; Fibres and yarns; Determination of commercial mass of consignments; Part 4 : Values used for the commercial allowances and the commercial moisture regains
404ISO/TR 5090-1977  Textiles; Methods for the removal of non-fibrous matter prior to quantitative analysis of fibre mixtures
405ISO/TR 8091-1983  Textiles; Twist factor related to the Tex System
406ISO/TR 9774-1990  Thermal-insulation materials; application categories and basic requirements; guidelines for the harmonization of international standards and other specifications
407ISO/TR 9774 Technical Corrigendum 1-1991  Thermal-insulation materials; application categories and basic requirements; guidelines for the harmonization of international standards and other specifications; technical corrigendum 1
408ISO/TR 9080-1992  Thermoplastics pipes for the transport of fluids; methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials
409ISO/TR 7821-1982  Tobacco; Preparation and constitution of identical samples from the same lot (Code of practice, for collaborative studies for evaluating methods of test)
410ISO/TR 9122-1-1989  Toxicity testing of fire effluents; part 1: general
411ISO/TR 9122-2-1990  Toxicity testing of fire effluents; part 2: guidelines for biological assays to determine the acute inhalation toxicity of fire effluents (basic principles, criteria and methodology)
412ISO/TR 9122-3-1993  Toxicity testing of fire effluents; part 3: methods for the analysis of gases and vapours in fire effluents
413ISO/TR 9122-4-1993  Toxicity testing of fire effluents; part 4: the fire model (furnaces and combustion apparatus used in small-scale testing)
414ISO/TR 9122-5-1993  Toxicity testing of fire effluents; part 5: prediction of toxic effects of fire effluents
415ISO/TR 9122-6-1994  Toxicity testing of fire effluents; part 6: guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport
416ISO/TR 14813-1-1999  Transport information and control systems - Reference model architecture(s) for the TICS sector - Part 1: TICS fundamental services
417ISO/TR 14813-5-1999  Transport information and control systems - Reference model architecture(s) for the TICS sector - Part 5: Requirements for architecture description in TICS standards
418ISO/TR 15349-1-1998  Unalloyed steel - Determination of low carbon content - Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)
419ISO/TR 15349-3-1998  Unalloyed steel - Determination of low carbon content - Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating)
420ISO/TR 7003-1990  Unified format for the designation of metals
421ISO/TR 4191-1989  Unplasticized polyvinyl chloride (PVC-U) pipes for water supply; recommended practics for laying
422ISO/TR 11696-1-1999  Uses of reaction to fire test results - Part 1: Application of test results to predict fire performance of internal linings and other building products
423ISO/TR 11696-2-1999  Uses of reaction to fire test results - Part 2: Fire hazard assessment of construction products
424ISO/TR 7470-1988  Valve outlets for gas cylinders; list of provisions which are either standardized or in use
425ISO/TR 3666-1998  Viscosity of water
426ISO/TR 11905-2-1997  Water quality - Determination of nitrogen - Part 2: Determination of bound nitrogen, after combustion and oxidation to nitrogen dioxide, using chemiluminescence detection
427ISO/TR 15462-1997  Water quality - Selection of tests for biodegradability
428ISO/TR 581-2005  Weldability -- Metallic materials -- General principles(available in English only
429ISO/TR 17844-2004  Welding -- Comparison of standardised methods for the avoidance of cold cracks(available in English only
430ISO/TR 15608-2000  Welding - Guidelines for a metallic materials grouping system
431ISO/TR 17663-2001  Welding - Guidelines for quality requirements for heat treatment in connection with welding and allied processes
432ISO/TR 17671-1-2002  Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
433ISO/TR 17671-2-2002  Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
434ISO/TR 17671-3-2002  Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
435ISO/TR 17671-4-2002  Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
436ISO/TR 17671-5-2004  Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steels
437ISO/TR 17671-6-2005  Welding -- Recommendations for welding of metallic materials -- Part 6: Laser beam welding(available in English only
438ISO/TR 17671-7-2004  Welding -- Recommendations for welding of metallic materials -- Part 7: Electron beam welding
439ISO/TR 22824-2003  Welding consumables -- Predicted and measured FN in specifications -- A position statement of the experts of IIW Commission IX
440ISO/TR 10828-1997  Worms gears - Geometry of worm profiles
441ISO/TR 10828 Technical Corrigendum 1-1998  Worms gears - Geometry of worm profiles; Technical Corrigendum 1

   Previous Page

Order the standard:ISO/TR
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com 





PAYMENT RECEIVE ACCOUNT:
ZXD@HLYT.COM
Contact us:
WWW.CN-STANDARD.NET
Beijing
Beijing Hualian-Yatong Network Information Technology Co.,LTD
Address:Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing
Tel:0086 10 88099016
Fax:86 10 88097217
Hongkong
CHINA STANDARD TRANSLATION LIMITED
Address:Room 1601, Chow Tai Fook Centre
No. 580 A-F Nathan Road, Mong Kok, Kowloon, HongKong
Tel:(852)22510719
Fax:(852)27702923

E-mail:zxd711020@hotmail.com
QQ:1041554835,158894832

MSN:gbstandard@hotmail.com
chinastandard@hotmail.com
zxd711020@hotmail.com

Following are the bank account info of www.chinese-standard.net:
(The relevant bank commission charge is for the client's account)

1.Oversea telegraphic:
Company's Name:CHINA STANDARD TRANSLATION LIMITED
Company Address:Room 1601, Chow Tai Fook Centre
No. 580 A-F Nathan Road, Mong Kok, Kowloon, HongKong
Tel:(852)22510719
Fax:(852)27702923


ACCOUNT NAME:CHINA STANDARD TRANSLATION LIMITED
A/C:817-401896-838
SWIFT CODE: HSBCHKHHHKH
BANK NAME: HSBC Hong Kong
BANK ADDRESS:1 Queen's Road Central, Hong Kong

2.Personal Account

Account Name: Mr. Zhang Xian dong
SWIFT CODE: BKCHCNBJ110
A/C: 318152074082
Bank: BANK OF CHINA, BEIJING BRANCH
Bank Address:8 Yabao Lu, Chaoyang District, Beijing, China


3.PayPal(www.paypal.com) Account Info(Credit Card payment):

E-mail:zxd@hlyt.com

Please confirm your order from the customer service(86 10 88099016)before your remittance.
If you order via remittance, please send a copy of the remittance bill to 86 10 88097217by fax,and please furnish clear information about the standard name and number you ordered, remittance sum, your name, company name, address, code, telephone number and etc. We will confirm your order ASAP.
Contact:Anny  Kang Yanyu
Tel:86 10 88099016/ 86 10 88097217(Fax)


 
TEL: 86 10 8809 9016
MSN:
gbstandard@hotmail.com
Chinese Standards Search       Disclaimer
 Chinese Version 

Copyright conserved by Beijing Hualian-Yatong Network Information Technology Co.,LTD & China Standard Translation LTD©2000-2014
WWW.CN-STANDARD.NET
Beijing
Beijing Hualian-Yatong Network Information Technology Co.,LTD
Address:Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing
Tel:0086 10 88099016 Fax:0086 10 88097217
Hongkong
CHINA STANDARD TRANSLATION LIMITED
Address:Room 1601, Chow Tai Fook Centre
No. 580 A-F Nathan Road, Mong Kok, Kowloon, HongKong
Tel:(852)22510719 Fax:(852)27702923