Chinese Standards Search       Chinese Version 
-- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
| HB | HB/Z | HCRJ | HG | HG/T | HGB | HGJ | HGT | HJ | Next Page
No.

HB：
1(100° flush head mechanical locked spindle and bulbed aluminum rivet) [Standard Code:HB 7722-2002 ]
2(100°flush head mechanical locked spindle and bulbed steel rivet) [Standard Code:HB 7724-2002 ]
3(120°countersunk head break mandrel blind rivets,in aluminummaterial) [Standard Code:HB 8005-2002 ]
4(120°countersunk head break mandrel blind rivets,in stainless steel material) [Standard Code:HB 8002-2002 ]
5(120°countersunk head threaded rivets) [Standard Code:HB 1-602-2002 ]
6(120°raised countersunk head bolts with cross recess) [Standard Code:HB 8040-2002 ]
7(120°raised countersunk head bolts with cross recess,short thread) [Standard Code:HB 1-157-2002 ]
8(120°raised head bolts,shank tolerance h9,in titanium alloy) [Standard Code:HB 8017-2002 ]
9(16th Edition of the Wiring Regulations - Guidance Note 3. Inspection and testing - 4th edition) [Standard Code:HB 10201-2001 ]
10(60°Reduce weight holes with bending rim) [Standard Code:HB 0-15-2003 ]
11(90°countersunk bolts with cross recess) [Standard Code:HB 1-130-2002 ]
12(90°countersunk bolts,short thread,shank tolerance h8) [Standard Code:HB 1-133-2002 ]
13(90°countersunk head bolts with cross recess,shank tolerance f9) [Standard Code:HB 1-134-2002 ]
14(90°countersunk head bolts with cross recess,shank tolerance f9) [Standard Code:HB 1-132-2002 ]
15(90°countersunk head bolts with recess,short thread tolerance p6) [Standard Code:HB 8039-2002 ]
16(90°countersunk head bolts with recess,tolerance p6) [Standard Code:HB 8038-2002 ]
17(90°countersunk head bolts,shank tolerance f9,in titanium alloy) [Standard Code:HB 8016-2002 ]
18(90°countersunk head break mandrel blind rivets,in aluminum alloy material) [Standard Code:HB 8004-2002 ]
19(90°countersunk head half crown rivet) [Standard Code:HB 8065-2002 ]
20(90°countersunk head ladder bolts with MJ thread,slotted) [Standard Code:HB 8034-2002 ]
21(90°countersunk head rivets) [Standard Code:HB 6304～HB 6314-2002 ]
22(90°countersunk head screw with cross recess) [Standard Code:HB 1-206-2002 ]
23(90°countersunk head screws in titanium alloy) [Standard Code:HB 8024-2002 ]
24(90°countersunk head screws with waisted shank) [Standard Code:HB 1-214-2002 ]
25(90°countersunk head screws,in nylon) [Standard Code:HB 8028-2002 ]
26(90°countersunk screws) [Standard Code:HB 1-205-2002 ]
27(90°Reduce weight holes with bending rim) [Standard Code:HB 0-16-2003 ]
28(90°reduced countersunk head bolts,in titanium alloy for interferance fit) [Standard Code:HB 8019-2002 ]
29(90°reduced countersunk head half crown rivet) [Standard Code:HB 8066-2002 ]
30(collars,in aluminum alloy material) [Standard Code:HB 8013-2002 ]
31(collars,in aluminum alloy material) [Standard Code:HB 8012-2002 ]
32(IEE On-site Guide (BS 7671:2001, 16th edition Wiring Regulations) [Standard Code:HB 10200-2001 ]
33(safty washer) [Standard Code:HB 8068-2002 ]
34(washers for cone bolts) [Standard Code:HB 1-501-2002 ]
3510000倍气动量仪用带定位台阶盲孔内径测量头(D＞14～30) [Standard Code:HB 6803-1993 ]
3610000倍气动量仪用带定位台阶盲孔内径测量头(D≥8～14) [Standard Code:HB 6802-1993 ]
3710000倍气动量仪用内径测量头(D＞10～18) [Standard Code:HB 6799-1993 ]
3810000倍气动量仪用内径测量头(D＞18～24) [Standard Code:HB 6800-1993 ]
3910000倍气动量仪用内径测量头(D＞24～40) [Standard Code:HB 6801-1993 ]
4010000倍气动量仪用内径测量头(D＞3～10) [Standard Code:HB 6798-1993 ]
4110000倍气动量仪用外径测量头(D＞18～30) [Standard Code:HB 6811-1993 ]
4210000倍气动量仪用外径测量头(D＞30～40) [Standard Code:HB 6812-1993 ]
4310000倍气动量仪用外径测量头(D＞6～18) [Standard Code:HB 6810-1993 ]
442000倍气动量仪用内径测量头(D＞10～18) [Standard Code:HB 6785-1993 ]
452000倍气动量仪用内径测量头(D＞18～24) [Standard Code:HB 6786-1993 ]
462000倍气动量仪用内径测量头(D＞24～65) [Standard Code:HB 6787-1993 ]
472000倍气动量仪用内径测量头(D＞65～80) [Standard Code:HB 6788-1993 ]
482000倍气动量仪用外径测量头(D＞10～18) [Standard Code:HB 6804-1993 ]
492000倍气动量仪用外径测量头(D＞18～30) [Standard Code:HB 6805-1993 ]
502000倍气动量仪用外径测量头(D＞50～80) [Standard Code:HB 6806-1993 ]
515000倍气动量仪用带定位台阶盲孔内径测量头(D＞14～30) [Standard Code:HB 6797-1993 ]
525000倍气动量仪用带定位台阶盲孔内径测量头(D≥8～14) [Standard Code:HB 6796-1993 ]
535000倍气动量仪用带定位台阶内径测量头(D＞14～30) [Standard Code:HB 6795-1993 ]
545000倍气动量仪用带定位台阶内径测量头(D≥8～14) [Standard Code:HB 6794-1993 ]
555000倍气动量仪用内径测量头(D＞10～18) [Standard Code:HB 6790-1993 ]
565000倍气动量仪用内径测量头(D＞18～24) [Standard Code:HB 6791-1993 ]
575000倍气动量仪用内径测量头(D＞24～65) [Standard Code:HB 6792-1993 ]
585000倍气动量仪用内径测量头(D＞3～10) [Standard Code:HB 6789-1993 ]
595000倍气动量仪用内径测量头(D＞65～80) [Standard Code:HB 6793-1993 ]
605000倍气动量仪用外径测量头(D＞18～30) [Standard Code:HB 6808-1993 ]
615000倍气动量仪用外径测量头(D＞30～80) [Standard Code:HB 6809-1993 ]
625000倍气动量仪用外径测量头(D＞6～18) [Standard Code:HB 6807-1993 ]
63A Business Guide to the Year 2000 [Standard Code:HB 10145-1998 ]
64A Guide for IT Companies Seeking or Maintaining Registration to ISO 9001/9002 [Standard Code:HB 10129-1997 ]
65A Guide for IT Companies Seeking or Maintaining Registration to ISO 9001/9002 [Standard Code:HB 10129-1997 ]
66A Guide for the Adoption of ISO 9001:2000 for Industries within the Foodchain [Standard Code:HB 10203-2002 ]
67A Guide for the Adoption of ISO 9001:2000 in Healthcare [Standard Code:HB 10202-2002 ]
68A Project-by-project Approach to Quality [Standard Code:HB 10156-1998 ]
69Acid etch inspection of grinding burn of steel parts for aviation [Standard Code:HB 7717-2002 ]
70Angle [Standard Code:HB 8070-2002 ]
71Angle tab washers [Standard Code:HB 6354～HB 6355-2002 ]
72Angle with nuts [Standard Code:HB 8069-2002 ]
73Arc washers [Standard Code:HB 1-503-2002 ]
74Arc washers for cone bolts [Standard Code:HB 1-502-2002 ]
75Arched clamp fixed two-sided [Standard Code:HB 3-17-2002 ]
76Arched clip and clamp fixed conducting wire [Standard Code:HB 6-61-2002 ]
77Aviation drawing Part 4:Assembly drawing brushwork [Standard Code:HB 5859.4-2003 ]
78Blind fastener internally threaded,external sleeve,alloy steel,120°countersunk head [Standard Code:HB 1-607-2002 ]
79Blind fastener internally threaded,external sleeve,alloy steel,90°countersunk head [Standard Code:HB 8067-2002 ]
80Blind fastener internally threaded,external sleeve,Alloy steel,hexagon head [Standard Code:HB 1-604-2002 ]
81Building Construction Handbook - Incorporating current building and construction regulations - 4th edition [Standard Code:HB 10213-2001 ]
82Bush for landing gear [Standard Code:HB 8105-2002 ]
83Bushing [Standard Code:HB 3-11-2002 ]
84Bushing for grade9 [Standard Code:HB 3-12-2002 ]
85Bushing for press-into [Standard Code:HB 3-13-2002 ]
86Bushing with flange for press-into [Standard Code:HB 3-10-2002 ]
87Cap,pressure seal,flared tube [Standard Code:HB 4-69-2002 ]
88Casing coupling conneting with electric wire [Standard Code:HB 8118-2002 ]
89CDM Regulations - Procedures manual - 2nd edition [Standard Code:HB 10215-2002 ]
90CDM Regulations - Procedures manual - 2nd edition [Standard Code:HB 10215-2002 ]
91Chain [Standard Code:HB 2-62-2002 ]
92Chamfer and Ring Groove of Thread Hole [Standard Code:HB 0-50-2003 ]
93Cheese head bolts with wire holes on head [Standard Code:HB 1-127-2002 ]
94Cheese head screws with wire holes on head [Standard Code:HB 1-203-2002 ]
95Cheese head,waisted shank bolts with wire holes on head [Standard Code:HB 1-213-2002 ]
96Circle spring clamp hoop [Standard Code:HB 8286-2002 ]
97Clamp connecting conduit and accessories for air system [Standard Code:HB 8092-2002 ]
98Clamp connecting conduit and accessories for high temperature and high pressure in air system [Standard Code:HB 8094-2002 ]
99Clamp for stainless steel band [Standard Code:HB 3-30-2002 ]
100Clamp for tube [Standard Code:HB 3-23-2002 ]
101Clearances,the tyre and the adjacent parts of the aircraft,Design requirements for [Standard Code:HB 7711-2002 ]
102Climate Change - A managerdanyihaos guide [Standard Code:HB 10184-2001 ]
103Code of Practice for In-service Inspection and Testing of Electrical Equipment - 2nd edition [Standard Code:HB 10194-2001 ]
104Combination of swivel nut for flared tube Technical requirement [Standard Code:HB 4-48-2002 ]
105Compaction gasket,titianium alloy [Standard Code:HB 8147-2002 ]
106Concave bending rim [Standard Code:HB 0-18-2003 ]
107Cone head threaded rivets [Standard Code:HB 1-601-2002 ]
108Connector [Standard Code:HB 8114-2002 ]
109Control rod,locked with locking gasket Dangler tie-in with bearing [Standard Code:HB 8226-2002 ]
110Control rod,locked with locking gasket Dangler tie-in withbearing [Standard Code:HB 8228-2002 ]
111Control rod,locked with locking gasket Locking gasket [Standard Code:HB 8230-2002 ]
112Control rod,locked with locking gasket Pole [Standard Code:HB 8225-2002 ]
113Control rod,locked with locking gasket Tie-in withbush [Standard Code:HB 8229-2002 ]
114Control rod,locked with locking gasket two dangler tie-ins with bearing [Standard Code:HB 8227-2002 ]
115Convex bending rim [Standard Code:HB 0-17-2003 ]
116Cover for fuel tank refuel [Standard Code:HB 8071-2002 ]
117Cover latch [Standard Code:HB 2-12-2002 ]
118Cross recesses [Standard Code:HB 7369-2002 ]
119Cross,D type,flared tube [Standard Code:HB 4-27-2002 ]
120Cross,E type,flared tube [Standard Code:HB 4-28-2002 ]
121Cross,F type flared tube [Standard Code:HB 4-29-2002 ]
122Cross,screwed-onto, flared tube [Standard Code:HB 4-30-2002 ]
123Cross,titianium alloy,flared tube [Standard Code:HB 8162-2002 ]
124Cross,with swivel nut,flared tube [Standard Code:HB 8217～HB 8220-2002 ]
125Cushion for instrument panel [Standard Code:HB 6-21-2002 ]
126Design requirements of mechanically fastened joint of composite structure for airplane [Standard Code:HB 7709-2002 ]
127Dimensioning and technical requirements for the fir-tree connection [Standard Code:HB 5965-2002 ]
128Eco-management Accounting [Standard Code:HB 10185-2001 ]
129Effective Document Management - Unlocking corporate knowledge [Standard Code:HB 10196-2001 ]
130Effective EMS Auditing [Standard Code:HB 10183-2001 ]
131Elbow,90 degree,soldering tube [Standard Code:HB 8169-2002 ]
132Elbow,90 degree,titianium alloy,flared tube [Standard Code:HB 8132-2002 ]
133Elbow,A type,90 degree,flared tube [Standard Code:HB 4-15-2002 ]
134Elbow,B type,45 degree,flared tube [Standard Code:HB 4-10-2002 ]
135Elbow,B type,45 degree,titianium alloy,flared tube [Standard Code:HB 8142-2002 ]
136Elbow,B type,90 degree,flared tube [Standard Code:HB 4-14-2002 ]
137Elbow,B type,90 degree,titianium alloy,flared tube [Standard Code:HB 8134-2002 ]
138Elbow,C type,45 degree,flared tube [Standard Code:HB 4-11-2002 ]
139Elbow,screwed-onto,45 degree,flared tube [Standard Code:HB 4-12-2002 ]
140Elbow,screwed-onto,45 degree,titianium alloy,flared tube [Standard Code:HB 8144-2002 ]
141Elbow,screwed-onto,90 degree titianium alloy,flared tube [Standard Code:HB 8138-2002 ]
142Elbow,screwed-onto,90 degree,flared tube [Standard Code:HB 4-16-2002 ]
143Elbow,with swivel nut,60 degree,flared tube [Standard Code:HB 8181～HB 8184-2002 ]
144Elbow,with swivel nut,90 degree,flared tube [Standard Code:HB 8177～HB 8180-2002 ]
145Electrical Pocket Book [Standard Code:HB 10005-1995 ]
146Electronics Engineersdanyihao Pocket Book - 2nd edition [Standard Code:HB 10193-2001 ]
147EMS Handbook - A guide to the BS EN ISO 14000 series - 2nd edition [Standard Code:HB 10140-1997 ]
148EMS)(ISO 14001 and Beyond: EMS in the real world [Standard Code:HB 10114-1997 ]
149Engaging Employees - Environmental training and internal communication [Standard Code:HB 10186-2001 ]
150Environmental Management Systems for SMEs [Standard Code:HB 10182-2001 ]
     Next Page

Sponsored Links
Chinese Translation Service
Documents Translation, Chinese-English
Language, Conference/Simultaneous Interpreter
Contact US: 86 10 8809 7400
E-mail: anny@hlyt.com
URL:http://www.hlyt.com/english/hlyt.htm

Engineering Project Service in China
Project Bidding, Information Service, Market
research, Quality Assurance Services, Non
Destructive Testing, Consultancy, Testing and
Training , R & D, Investing... IN CHINA
Contact ISQ-China: 86 10 8809 7217
E-mail: zxd@hlyt.com
URL:http://www.isq.pt
 

Chinese Standards Search       

Copyright conserved by Chinese standard translation.net©1999-2005
Technology support by Beijing Hualian-Yatong Network Information Technology Co.,LTD
Tel：010 - 88099016 88097400 Fax：010-88097217
Address：Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing