TEL:   86 10 88099016
MSN: gbstandard@hotmail.com
Chinese Standards Search        Disclaimer
 Chinese Version
 
 
 
Order the standard:GBT
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com 
Home Page -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
---> Previous Page
No.

GBT  Standards:
1GBT 22084.2-2008   Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride
2GBT 22035-2008   Test of vegetable fat in milk and milk products - Gas chromatography
3GBT 5195-2006  (1、4、5、6、10、11）Methods for chemical analysis of fluorspar
4GBT 24768-2009  1,4-Butanediol for industrial use
5GBT 23667-2009  2，5-Dichloroaniline
6GBT 23669-2009  2,6-Dibromo-4-nitroaniline
7GBT 13660-2008  201×7 Strong base polystyrene anion exchange resin
8GBT 23672-2009  2-Ethylanthraquinone
9GBT 23671-2009  2-Hydroxy-6-naphthalene carboxylic acid
10GBT 12908-1991  3 of 9 bar code
11GBT 23673-2009  3，4-Dichloroaniline
12GBT 20619-2006  40% Methidathion emulsifiable concentrates
13GBT 20045-2005  40mm Table tennic ball
14GBT 4265-2004  90°Countersinks with pilots--Technical requirements
15GBT 13596-1992  A method for the determination of organochlorine pesticide residues in tobacco leaves
16GBT 13595-1992  A method for the determination of pyrethroids residues in tobacco leaves
17GBT 12454-2008  A method of evaluating the visual environment
18GBT 14806-1993  A.C.electric ventilating fans and regulators for household and similar purposes
19GBT 21387-2008  Aaxial flow check valve
20GBT 23294-2009  Abrasion resistant refractory materials
21GBT 20316.2-2006  Abrasive grains - Determination of bulk density - Part 2: Microgrits
22GBT 20107-2006  Absorption water chiller(heater) for villa and similar application
23GBT 23640-2009  AC generators for reciprocating internal combustion(RIC) engine driven generating sets
24GBT 3667-1993  AC motor capacitors
25GBT 3667.1-2005  AC motor capacitors-Part 1:General-Performance,testing and rating-Safety requirements-Guide for installation and operation
26GBT 6404.1-2005  Acceptance code for gear units-Part1:Test code for airborne sound
27GBT 6404.2-2005  Acceptance code for gear units-Part2: Determination of mechanical vibrations of gear units during acceptance testing
28GBT 21031-2007  Acceptance code of practice for water-saving irrigation equipment on the site
29GBT 23491-2009  Acceptance guide for processing technique and equipment of feed enterprise
30GBT 21671-2008  Acceptance test specification for Local Area Network (LAN) systems based on ethernet technology
31GBT 24477-2009  Accessibility to lifts for persons including persons with disability
32GBT 23615.1-2009  Accessorial material for architectural aluminum alloy profiles-Part 1: Thermal barrier strip of polyamide
33GBT 24599-2009  Accessories for laying interior wooden flooring
34GBT 19889.3-2005  Accoustics-Measurement of sound insulation in buildings and of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements
35GBT 13283-2008  Accuracy class of measuring instruments and display instruments for industrial process measurement and control
36GBT 12447-1990  Accuracy test for press die sets
37GBT 6379.5-2006  Accuracy(trueness and precision) of measurement methods and results -Part 5: Alternative methods for the determination of the precision of a standard measurement method
38GBT 6379.6-2009  Accuracy(trueness and precision) of measurement methods and results-Part 6: Use in practice of accuracy values
39GBT 3782-2006  Acetylene black
40GBT 3781.5-2006  Acetylene black―Part 5: Determination of grit content
41GBT 3781.6-2006  Acetylene black―Part 6: Determination of apparent specific volume
42GBT 3781.8-2006  Acetylene black―Part 8: Determination of hydrochloric acid absorption number
43GBT 21881-2008  Acid dyes-Determination of levelling properties
44GBT 22516-2008  Acoustic noise measurement techniques of wind turbine generators systems
45GBT 19884-2005  Acoustics-
46GBT 20246-2006  Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method
47GBT 20248-2006  Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight
48GBT 20243.1-2006  Acoustics - Measurement of the influence of road surface on traffic noise Part 1: Statistical Pass-By method
49GBT 5266-2006  Acoustics - Measurements of the longitudinal wave velocity and attenuation coefficient for underwater acoustical materials - Pulse tube method
50GBT 20242-2006  Acoustics - Procedures for the measurement of real-ear acoustical characteristics of hearing aids
51GBT 16407-2006  Acoustics―Characteristics and measurements of field of Pressure pulse lithotripters
52GBT 3222.1-2006  Acoustics―Description, measurement and assessment of environmental noise―Part 1:Basic quantities and assessment procedures
53GBT 19885-2005  Acoustics-Determination of sound insulation performance of cabins-Laboratory and in-situ measurements
54GBT 6882-2008  Acoustics-Determination of sound power levels of noise sources using pressure-Precision methods for anechoic and hemi-anechoic rooms
55GBT 4129-1995  Acoustics-Determination of sound power levels of noise sources-Requirements for the performance and calibration of reference sound source
56GBT 19886-2005  Acoustics-Guidelines for noise control by enclosures and cabins
57GBT 20431-2006  Acoustics―Guidelines for noise control by silencers
58GBT 19890-2005  Acoustics-High intensity focused ultrasound(HIFU)measurements of acoustic power and field characteristics
59GBT 20247-2006  Acoustics-Measurement of sound absorption in a reverberation room
60GBT 19889.10-2006  Acoustics―Measurement of sound insulation in buildings and of building elements―Part 10：Laboratory measurements of airborne sound insulation of small building elements
61GBT 19889.5-2006  Acoustics―Measurement of sound insulation in buildings and of building elements―Part 5: Field measurements of airborne sound insulation of facade elements and facades
62GBT 19889.6-2005  Acoustics-Measurement of sound insulation in buildings and of building elements-Part 6:Laboratory measurments of impact sound insulation of floors
63GBT 19889.7-2005  Acoustics-Measurement of sound insulation in buildings and of building elements-Part 7:Field measurements of impact sound insulation of floors
64GBT 19889.8-2006  Acoustics―Measurement of sound insulation in buildings and of building elements―Part 8 :Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor
65GBT 19889.2-2005  Acoustics-Measurement of sound insulation in buildings and of building elements-Part2:Determination,verification and application of precision data
66GBT 19887-2005  Acoustics-Measurement of the in situ sound attenuation of a removable screen
67GBT 19889.4-2005  Acoustics-Measurements of sound insulation in buildings and of building elements-Part 4:Field measurements of airborne sound insulation between rooms
68GBT 20430-2006  Acoustics―Noise control design procedures for open plant
69GBT 19888.1-2005  Acoustics-Stationary audible warning devices used outdoors-Part 1:Field measurements for determination of sound emission quantifies
70GBT 19889.1-2005  Acoustics-Stationary audible warning devices used outdoors-Part 1:Field measurements for determination of sound emission quantities
71GBT 16602-2008  Acrylic staple and tow
72GBT 7717.11-2008  Acrylonitrile for industrial use-Part 11: Determination of content of iron and copper-Spectrophotometric method
73GBT 7717.16-2009  Acrylonitrile for industrial use-Part 16:Determination of content of iron-Graphite furnace atomic absorption spectrometer method
74GBT 20207.1-2006  Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 1: Pipes
75GBT 20207.2-2006  Acrylonitrile-butadiene-styrene (ABS) pressure piping systems - Part 2: fittings
76GBT 12672-2009  Acrylonitrile-butadiene-styrene(ABS)resin
77GBT 13805-1992  Activated carbon for refining of sugar
78GBT 20740-2006  Adhesive - Sampling
79GBT 12668.4-2006  Adjustable speed electrical power drive systems-Part 4:General requirements-Rating specifications for a.c.power drive systems above 1 000 V a.c. not exceeding 35 kV
80GBT 4440-2008  Adjustable wrenches
81GBT 24395-2009  Adsorption resin for food industrial use
82GBT 22273-2008  Advisory document for good laboratory practice:The application of the principles of GLP to in vitro studies
83GBT 22276-2008  Advisory document for good laboratory practice-Requesting and carrying out inspections and study audits in another country
84GBT 14049-2008  Aerial insulated cables for rated voltage of 10kV
85GBT 20857-2007  Aerospace - Aircraft de-icing/anti-icing non-Newtonian fluids, ISO type II
86GBT 20856-2007  Aerospace-Aircraft de-icing/anti-icing Newtonian fluids，ISO type I
87GBT 19797-2005  Agricultural irrigation equipment-Centre-pivot and moving lateral irrigation machines-Determination of uniformity of water distribution
88GBT 19793-2005  Agricultural irrigation equipment-Hydraulically operated irrigation avlves
89GBT 19796-2005  Agricultural irrigation equipment-Plastics saddles for polyethylene pressure pipes
90GBT 19795.1-2005  Agricultural irrigation equipment-Rotating sprinklers-Part1: Design and operational requirements
91GBT 19795.2-2005  Agricultural irrigation equipment-Rotating sprinklers-Part2: Uniformity of distribution and test methods
92GBT 19794-2005  Agricultural irrigation equipment-Volumetric valves-General requirements and test methods
93GBT 19792-2005  Agricultural irrigation equipment-Water-driven chemical injector pumps
94GBT 20340-2006  Agricultural machinery - Agricultural trailers and trailed equipment - Drawbar jacks
95GBT 10415-2007  Agricultural machinery - Endless hexagonal belts and groove sections of corresponding pulleys
96GBT 10416-2007  Agricultural machinery - Endless variable - speed V-belts and groove sections of corresponding pulleys
97GBT 1209.2-2009  Agricultural machinery-Cutter bars-Part 2:Guard
98GBT 1209.4-2009  Agricultural machinery-Cutter bars-Part 4:Knife clips
99GBT 19991-2005  Agricultural machinery-Equipment for sowing, planting, distributing fertilizers and spraying-Recommended working widths
100GBT 19988-2005  Agricultural machinery-Equipment for working the soil S-tines:main dimensions and clearance zones
101GBT 19987-2005  Agricultural machinery-Equipment for working the soil S-tines:Test method
102GBT 9482-2005  Agricultural machines implements and equipment Dimensions for mechanical loading with bulk goods
103GBT 20342-2006  Agricultural tractors and machinery - Coding of remote hydraulic power services and controls
104GBT 3871.11-2005  Agricultural tractors-Test procedures-Part 11:Suitability tests for hot atmosphere
105GBT 3871.12-2005  Agricultural Tractors-Test procedures-Part 12:Working Tests
106GBT 3871.7-2006  Agricultural tractors-Test procedures-Part 7:Operators field of vision
107GBT 3871.10-2006  Agricultural tractors-Test procedures-Part10: Low temperature starting
108GBT 3871.13-2006  Agricultural tractors-Test procedures-Part13: Measurement of exhaust smoke
109GBT 3871.14-2006  Agricultural tractors-Test procedures-Part14: Partial power PTO-Non-mechanically transmitted power
110GBT 3871.15-2006  Agricultural tractors-Test procedures-Part15: Centre of gravity
111GBT 3871.16-2006  Agricultural tractors-Test procedures-Part16: Axle power determination
112GBT 3871.17-2006  Agricultural tractors-Test procedures-Part17: Engine air cleaner
113GBT 3871.18-2006  Agricultural tractors-Test procedures-Part18: Hydraulic power at tractor/implement interface
114GBT 3871.19-2006  Agricultural tractors-Test procedures-Part19: Steering capability of wheeled tractors
115GBT 3871.2-2006  Agricultural tractors-Test procedures-Part2: Measurements of tractor parameters
116GBT 3871.3-2006  Agricultural tractors-Test procedures-Part3:Power tests for power take-off
117GBT 3871.4-2006  Agricultural tractors-Test procedures-Part4: Rear three-point linkage lifting capacity
118GBT 3871.5-2006  Agricultural tractors-Test procedures-Part5: Turning and clearance diameters
119GBT 3871.9-2006  Agricultural tractors-Test procedures-Part9: Power tests for drawbar
120GBT 19408.2-2009  Agricultural vehicles-Mechanical connections between towed and towing vehicles-Part 2:Specifications for clevis coupling 40
121GBT 19408.3-2009  Agricultural vehicles-Mechanical connections between towed and towing vehicles-Part 3:Tractor drawbar
122GBT 13876-2007  Agricultural wheeled tractors - Evalution criteria of whole body vibration of the operator
123GBT 20524-2006  Agriculture and forest microclimate measuring instrument
124GBT 24401-2009  Aipha-amylase preparation
125GBT 23418-2009  Air cargo and ground equipment-Vocabulary
126GBT 14295-2008  Air filters
127GBT 24649.1-2009  Air reservoir of pneumatic braking system of tractor-trailers-Specifications
128GBT 7995-2005  Air seal test method of glass-lined equipments
129GBT 20083.1-2006  Air-assisted agricultural sprayers?Data sheets?Part 1: Typical layout
130GBT 20083.2-2006  Air-assisted agricultural sprayers-Data sheets-Part 2: Technical specifications related to components
131GBT 19842-2005  Air-conditioning units for railbound vehicles
132GBT 23421-2009  Aircraft-Basic requirements for aircraft loading equipment
133GBT 23423-2009  Aircraft-Wide body aircraft main deck container/pallet loader-Functional requirements
134GBT 17049-2005  All-glass evacuated solar collector tubes
135GBT 20209-2006  Al-Mg Alloy powdery for fireworks and firecrackers
136GBT 19708-2005  Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
137GBT 17215-1998  Alternating current static watt-hour meters for active energy (classes 1 and 2)
138GBT 12167-2006  Aluminium alloy grip clamps of tension wire for live working
139GBT 8733-2007  Aluminium alloy ingots for casting
140GBT 22646-2008  Aluminium alloys foil for beer label
141GBT 4438-2006  Aluminium and aluminium alloy corrugated sheets
142GBT 22644-2008  Aluminium and aluminium alloys foil for cardboard
143GBT 22647-2008  Aluminium and aluminium alloys foil for flexible packaging
144GBT 22645-2008  Aluminium and aluminium alloys foil for PTP
145GBT 22649-2008  Aluminium and aluminium alloys foil for semi-rigid container
146GBT 22648-2008  Aluminium and aluminium alloys foil for soft tube
147GBT 3250-2007  Aluminium and aluminium alloys shear test method for rivet wire and rivets and riveting test method for rivet wire
148GBT 4292-2007  Aluminium fluoride
149GBT 3615-2007  Aluminium foil for electrolytic capacitor
150GBT 8005.3-2008  Aluminium of aluminium alloys-Terms and difinitions-Part 3:Surface treatment terms
     Next Page
Order the standard:GBT
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN & E-mail:zxd711020@hotmail.com  gbstandard@hotmail.com  chinastandard@hotmail.com 





PAYMENT RECEIVE ACCOUNT:
ZXD@HLYT.COM
Contact us:
WWW.CN-STANDARD.NET
Beijing
Beijing Hualian-Yatong Network Information Technology Co.,LTD
Address:Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing
Tel:0086 10 88099016
Fax:86 10 88097217
Hongkong
CHINA STANDARD TRANSLATION LIMITED
Address:ROOMS 1318-19,HOLLYWOOD PLAZA
610 NATHAN ROAD, MONGKOK, KOWLOON,HK
Tel:00852-27108200
Fax:00852-27108266

E-mail:zxd711020@hotmail.com
QQ:1041554835,158894832

MSN:gbstandard@hotmail.com
chinastandard@hotmail.com
zxd711020@hotmail.com

Following are the bank account info of www.chinese-standard.net:
(The relevant bank commission charge is for the client's account)

1.Oversea telegraphic:
Company's Name:CHINA STANDARD TRANSLATION LIMITED
Company Address:ROOMS 1318-19,HOLLYWOOD PLAZA
610 NATHAN ROAD, MONGKOK, KOWLOON,HK
Tel:00852-27108200
Fax:00852-27108266


ACCOUNT NAME:CHINA STANDARD TRANSLATION LIMITED
A/C:817-401896-838
SWIFT CODE: HSBCHKHHHKH
BANK NAME: HSBC Hong Kong
BANK ADDRESS:1 Queen's Road Central, Hong Kong

2.Personal Account

Account Name: Mr. Zhang Xian dong
SWIFT CODE: BKCHCNBJ110
A/C: 4080000-0188-078588-0
Bank: BANK OF CHINA, BEIJING BRANCH
Bank Address:8 Yabao Lu, Chaoyang District, Beijing, China

3.PayPal(www.paypal.com) Account Info(Credit Card payment):

E-mail:zxd@hlyt.com

Please confirm your order from the customer service（86 10 88099016）before your remittance.
If you order via remittance, please send a copy of the remittance bill to 86 10 88097217by fax，and please furnish clear information about the standard name and number you ordered, remittance sum, your name, company name, address, code, telephone number and etc. We will confirm your order ASAP.
Contact:Anny  Kang Yanyu
Tel:86 10 88099016/ 86 10 88097217（Fax）
 
TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search       Disclaimer
 Chinese Version 

Copyright conserved by Beijing Hualian-Yatong Network Information Technology Co.,LTD©2000-2012
WWW.CN-STANDARD.NET
Beijing
Beijing Hualian-Yatong Network Information Technology Co.,LTD
Address:Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing
Tel:0086 10 88099016 Fax:86 10 88097217
Hongkong
CHINA STANDARD TRANSLATION LIMITED
Address:ROOMS 1318-19,HOLLYWOOD PLAZA
610 NATHAN ROAD, MONGKOK, KOWLOON,HK
Tel:00852-27108200 Fax:00852-27108266