TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 
Order the standard:BS
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com
Home Page -- - -- A -- B -- C -- D -- E -- F -- G -- H -- I -- J -- K -- L -- M -- N -- O -- P -- Q -- R -- S -- T -- U -- V -- W -- X -- Y -- Z
---> Previous Page
No.

BS  Standards:
1BS 1363-2-1995  (13 A plugs, socket-outlets and adaptors - Specification for 13 A switched and unswitched socket-outlets)
2BS 1363-4-1995  (13 A plugs, socket-outlets and adaptors - Specification for 13A fused connection units switched and unswitched)
3BS 1363-3-1995  (13 A plugs, socket-outlets and adaptors - Specification for adaptors)
4BS 1363-1-1995  (13 A plugs, socket-outlets and adaptors - Specification for rewirable and non-rewirable 13 A fused plugs)
5BS 4F 119-2002  (145 g/mUP2 to 235 g/mUP2 nylon parachute fabric)
6BS 3F 126-2002  (35 g/mUP2 nylon parachute fabric)
7BS 5F 118-2002  (50 g/mUP2 nylon parachute fabric)
8BS EN 2104-1996  (Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD
9BS CWA 13849-2-2000  (ActiveXFS interface specification - ActiveXFS card reader object interface specification
10BS CWA 13849-3-2000  (ActiveXFS interface specification - ActiveXFS cash dispenser object interface specification
11BS CWA 13849-1-2000  (ActiveXFS interface specification - ActiveXFS common object interface specification
12BS CWA 13849-4-2000  (ActiveXFS interface specification - ActiveXFS depository object interface specification
13BS CWA 13849-8-2000  (ActiveXFS interface specification - ActiveXFS document printer object interface specification
14BS CWA 13849-6-2000  (ActiveXFS interface specification - ActiveXFS journal printer object interface specification
15BS CWA 13849-12-2000  (ActiveXFS interface specification - ActiveXFS night safe object interface specification
16BS CWA 13849-5-2000  (ActiveXFS interface specification - ActiveXFS PINPad object interface specification
17BS CWA 13849-13-2000  (ActiveXFS interface specification - ActiveXFS printer auxiliary object interface specification
18BS CWA 13849-7-2000  (ActiveXFS interface specification - ActiveXFS receipt printer object interface specification
19BS CWA 13849-10-2000  (ActiveXFS interface specification - ActiveXFS sensors doors and indicators object interface specification
20BS CWA 13849-11-2000  (ActiveXFS interface specification - ActiveXFS text terminal object interface specification
21BS EN 4167-2003  (Aerospace series - Clips, spring tension, three parts - Inner clips in heat resisting steel FE-PA92HT (A286)
22BS EN 4168-2003  (Aerospace series - Clips, spring tension, three parts - Outer clips in heat resisting steel FE-PA92HT (A286)
23BS EN 3959-2001  (Aerospace series - Cobalt base alloy CO-B41601 (CoCr19Ni17Si8W4) - Filler metal for brazing - Powder or paste
24BS EN 3960-2001  (Aerospace series - Gold base alloy AU-B40001 (AuNi18) - Filler metal for brazing - Powder or paste
25BS EN 4338-2001  (Aerospace series - Heat resisting alloy - NI-WH3902 (NiCr25Mo10C) - Filler metal for welding - Wire and rod
26BS EN 4327-2001  (Aerospace series - Heat resisting alloy CO-WH1401 (CoCr26Ni11W8) - Filler metal for welding - Wire and rod
27BS EN 3888-2001  (Aerospace series - Heat resisting alloy CO-WH1402 (CoCr22Ni22W15) - Filler metal for welding
28BS EN 4339-2001  (Aerospace series - Heat resisting alloy CO-WH4001 (CoCr29W9) - Filler metal for welding - Wire and rod
29BS EN 3887-2001  (Aerospace series - Heat resisting alloy CO-WH4101 (CoCr20W15Ni) - Filler metal for welding
30BS EN 4326-2001  (Aerospace series - Heat resisting alloy CO-WH4102 (CoCr28W20Ni5V1) - Filler metal for welding - Wire and rod
31BS EN 3894-2001  (Aerospace series - Heat resisting alloy NI-WD3201 (NiMo25Fe6Cr5) - Filler metal for welding
32BS EN 4329-2001  (Aerospace series - Heat resisting alloy NI-WH0001 (NiCr20) - Filler metal for welding - Wire and rod
33BS EN 4325-2001  (Aerospace series - Heat resisting alloy NI-WH1302 (NiCr20Co13Mo4Ti3AI) - Filler metal for welding - Wire and rod
34BS EN 3886-2001  (Aerospace series - Heat resisting alloy NI-WH1303 (NiCo20Cr20Mo5Ti2Al) - Filler metal for welding
35BS EN 3882-2001  (Aerospace series - Heat resisting alloy NI-WH1801 (NiCr20Co18Ti3Al2) - Filler wire for welding
36BS EN 3883-2001  (Aerospace series - Heat resisting alloy NI-WH2301 (NiCr22Fe19Mo9Co2) - Filler metal for welding
37BS EN 3884-2001  (Aerospace series - Heat resisting alloy NI-WH2601 (NiCr19Nb5Mo3Ti) - Filler metal for welding
38BS EN 3885-2001  (Aerospace series - Heat resisting alloy NI-WH3601 (NiCr22Mo9Nb4) - Filler metal for welding
39BS EN 3895-2001  (Aerospace series - Heat resisting alloy NI-WH3901 (NiCr16Mo15) - Filler metal for welding
40BS EN 4337-2001  (Aerospace series - Heat resisting alloy NI-WH8901 (NiCr16Ti3Mn2) - Filler metal for welding - Wire and rod
41BS EN 3923-2001  (Aerospace series - Nickel base alloy NI - B41203 (NiCr7Si5B3Fe3) - Filler metal for brazing - Powder or paste
42BS EN 3932-2001  (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Amorphous foil
43BS EN 3933-2001  (Aerospace series - Nickel base alloy NI-B13001 (NiP11) - Filler metal for brazing - Powder or paste
44BS EN 3934-2001  (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Amorphous foil
45BS EN 3936-2001  (Aerospace series - Nickel base alloy NI-B21001 (NiCr15B4) - Filler metal for brazing - Powder or paste
46BS EN 3930-2001  (Aerospace series - Nickel base alloy NI-B31001 (NiCr19Si10) - Filler metal for brazing - Powder or paste
47BS EN 3925-2001  (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Amorphous foil
48BS EN 3926-2001  (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Borided foil
49BS EN 3927-2001  (Aerospace series - Nickel base alloy NI-B40001 (NiSi5B3) - Filler metal for brazing - Powder or paste
50BS EN 4103-2001  (Aerospace series - Nickel base alloy NI-B40002 (NiSi4B2) - Filler metal for brazing - Borided foil
51BS EN 3943-2001  (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Fe4Si4B3) - Filler metal for brazing - Powder or paste
52BS EN 3942-2001  (Aerospace series - Nickel base alloy NI-B41204 (NiCr13Si4B3) - Filler metal for brazing - Borided foil
53BS EN 3937-2001  (Aerospace series - Nickel base alloy NI-B44101 (NiW12Cr10Si4Fe3B3) - Filler metal for brazing - Powder or paste
54BS EN 4250-2001  (Aerospace series - Nickel base alloys NI-B41001 (NiCr19Si7B) - Filler metal for brazing - Amorphous foil
55BS EN 4119-2003  (Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650 ℃
56BS EN 4118-2003  (Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature) / 650
57BS EN 4116-2003  (Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1 100 MPa (at ambient temperature)/425 ℃
58BS EN 3726-2003  (Aerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature)/425 ℃
59BS EN 3752-2003  (Aerospace series - Nuts, self-locking, MJ threads, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 Mpa (at ambient temperature) / 425 ℃ - Technical specification
60BS EN 3746-2003  (Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
61BS EN 3747-2003  (Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification
62BS EN 4122-2003  (Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 ℃
63BS EN 3014-2001  (Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286) - Classification: 1100 MPa (at ambient temperature)/650 ℃
64BS EN 3015-2001  (Aerospace series - Shank nuts, self-locking, serrated, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1100 MPa (at ambient temperature)/650 ℃
65BS EN 4121-2003  (Aerospace series - Shank nuts, serrated, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/650 ℃
66BS EN 3952-2001  (Aerospace series - Silver base alloy AG-B10001 (AgCu28) - Filler metal for brazing - Wire
67BS EN 3954-2001  (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Powder or paste
68BS EN 3955-2001  (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Rolled foil
69BS EN 3953-2001  (Aerospace series - Silver base alloy AG-B12401 (AgCu40Zn5Ni) - Filler metal for brazing - Wire
70BS EN 3957-2001  (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Powder or paste
71BS EN 3958-2001  (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Rolled foil
72BS EN 3956-2001  (Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2) - Filler metal for brazing - Wire
73BS ISO 21962-2003  (Aerospace series - Space data and information transfer systems - Data entity dictionary specification language (DEDSL) - PVL syntax
74BS EN 4335-2002  (Aerospace series - Steel FE-WA2602 (X4NiCrTiMoV26-15) - Filler metal for welding - Wire and rod
75BS EN 4336-2002  (Aerospace series - Steel FE-WA3801 (X4CrNiMn20-10-2) - Filler metal for welding - Wire and rod
76BS EN 4330-2002  (Aerospace series - Steel FE-WA4802 (X8CrNiMn27-22-2) - Filler metal for welding - Wire and rod
77BS EN 4333-2002  (Aerospace series - Steel FE-WA4902 (X5CrNiCoMoWMn21-20-20-3-3-2) - Filler metal for welding - Wire and rod
78BS EN 4343-2002  (Aerospace series - Steel FE-WM1001 (X13Cr12) - Filler metal for welding - Wire and rod
79BS EN 4344-2001  (Aerospace series - Steel FE-WM1002 (X13Cr13) - Filler metal for welding - Wire and rod
80BS EN 4328-2002  (Aerospace series - Steel FE-WM1601 (X18CrWNi13-3-2) - Filler metal for welding - Wire and rod
81BS EN 50129-2003  (ailway applications - Communication, signalling and processing systems - Safety related electronic systems for signalling)
82BS 6538-3-1987  (Air permeance of paper and board - Method for determination of air permeance using the Gurley apparatus
83BS EN ISO 9360-1-2000  (Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - HMEs for use with minimum tidal volumes of 250 ml
84BS EN ISO 9360-2-2002  (Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
85BS 6870-2.6-1987  (Analysis of aluminium ores - Chemical methods - Method for determination of aluminium content: EDTA titrimetric method
86BS 7709-6-1993  (Analysis of extract solutions of glass - Method for determination of boron (III) oxide by molecular absorption spectrometry
87BS 7709-5-1993  (Analysis of extract solutions of glass - Method for determination of iron (III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
88BS 3762-3.19-1983  (Analysis of formulated detergents - Quantitative test methods - Method for determination of total phosphorus (V) oxide content
89BS 7020-22-1990  (Analysis of iron ores - Method for the determination of acid-soluble iron (II) content: titrimetric method
90BS 7020-4.2-1990  (Analysis of iron ores - Method for the determination of total iron content - Titanium (III) chloride reduction methods
91BS 1715-2.9-1990  (Analysis of soaps - Quantitative test methods - Method for determination of EDTA content
92BS 6328-5-1984  (Apparatus for connection to private circuits run by certain public telecommunication operators - Specification for apparatus for connection to wideband (FDM) circuits
93BS 7378-1-1997  (Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - General requirements
94BS 7378-2-1991  (Apparatus for connection to public telecommunications systems using the Digital Access Signalling System No. 2 (DASS 2) via a 2048 kbit/s CCITT Recommendation G.703 interface - Specification for au
95BS EN 60974-10-2003  (Arc welding equipment - Electromagnetic compatibility (EMC) requirements
96BS EN 2929-1996  (Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃
97BS EN 2930-1996  (Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification:1210 MPa (at ambient temperature)/730 ℃
98BS EN 2925-1994  (Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A 286) - Classification: 900 MPa (at ambient temperature)/650 ℃
99BS EN 2926-1996  (Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃
100BS EN 3006-1994  (Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ℃
101BS EN 3007-1996  (Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), Silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃
102BS EN 2935-1996  (Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification:1210 MPa (at ambient temperature)/730 ℃
103BS EN 2936-1996  (Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃
104BS EN 2931-1994  (Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 ℃
105BS EN 2932-1996  (Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃
106BS EN 2133-1998  (Cadmium plating of steels with specified tensile strength
107BS EN 61746-2001  (Calibration of optical time-domain reflectometers (OTDRs)
108BS EN 634-2-1997  (Cement-bonded particle boards - Specification - Requirements for OPC bonded particleboards for use in dry, humid and exterior conditions
109BS 6431-6-1984  (Ceramic floor and wall tiles - Specification for dust-pressed ceramic tiles with a low water absorption (E
110BS 6431-2-1984  (Ceramic floor and wall tiles - Specification for extruded ceramic tiles with a low water absorption (E
111BS ISO 15681-2-2004  (CFA)(Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Method by continuous flow analysis (CFA)
112BS EN 13137-2001  (Characterisation of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments
113BS EN 13656-2002  (Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNODOWN3), and hydrochloric (HCl) acid mixture for subsequent determination of elements
114BS EN 935-2004  (Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) chloride (monomeric) and aluminium iron (III) chloride hydroxide (monomeric)
115BS ISO 2475-2000  (Chloroprene rubber (CR) - General-purpose types - Evaluation procedure
116BS 5550-2.4.4-1980  (Cinematography - 16 mm film - Sound - Specification for positions and width dimensions of recording head gaps for two sound records on 16 mm magnetic film
117BS 7958-1999  (Closed-circuit television (CCTV) - Management and operation - Code of practice
118BS 7594-1993  (Code of practice for audio-frequency induction-loop systems (AFILS)
119BS CP 312-2-1973  (Code of practice for plastics pipework (thermoplastics material) - Unplasticized PVC pipework for the conveyance of liquids under pressure
120BS 7988-2002  (Code of practice for the use of information technology (IT) in the delivery of assessments
121BS 5618-1985  (Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems
122BS EN 13523-14-2001  (Coil coated metals - Test methods - Chalking (Helmen method)
123BS EN 13523-7-2001  (Coil coated metals - Test methods - Resistance to cracking on bending (T-bend test)
124BS EN 61850-8-1-2004  (Communication networks and systems in substations - Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
125BS EN 61850-9-2-2004  (Communication networks and systems in substations - Specific communication service mapping (SCSM) - Sampled values over ISO/IEC 8802-3
126BS EN 61850-9-1-2003  (Communication networks and systems in substations - Specific communication service mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link
127BS EN 61238-1-2003  (Compression and mechanical connectors for power cables for rated voltages up to 36 kV (UDOWNm = 42 kV) - Test methods and requirements
128BS DD 194-1990  (Computer integrated manufacturing (CIM): CIM systems architecture framework for modelling
129BS EN ISO 9974-2-2000  (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with elastomeric sealing (type E)
130BS EN ISO 9974-3-2000  (Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Stud ends with metal-to-metal sealing (type B)
131BS EN 61076-2-103-2004  (Connectors for electronic equipment - Circular connectors - Detail specification for a range of multipole connectors (type danyihaoXLRdanyihao)
132BS EN 60874-1997  (Connectors for optical fibres and cables. Sectional specification for fibre optic connector. Type SC-D (Duplex)
133BS EN 61076-3-103-2004  (Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Rectangular connectors - Detail specification for single row connectors with non-removable ribb
134BS 1192-5-1998  (Construction drawing practice - Guide for structuring and exchange of CAD data
135BS EN 618-2002  (Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
136BS EN 619-2002  (Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
137BS EN 10154-2002  (Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions
138BS CWA 14191-2001  (Co-ordination of directory management domains (DMDs)
139BS EN 60604-1993  (danyihaoTopflash/Flipflashdanyihao photographic flash lamp array)
140BS DD ENV 50208-6-1998  (Data interchange format for Simulated and Measured Data (ISMD)
141BS EN 438-2-1991  (Decorative high-pressure laminates (HPL) sheets based on thermosetting resins - Determination of properties
142BS EN 438-1-1991  (Decorative high-pressure laminates (HPL) sheets based on thermosetting resins - Specifications
143BS EN 62262-1995  (Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
144BS EN 50102-1995  (Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
145BS 9210 N0009-2-1978  (Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Control drawings - Mating face details and gauge information
146BS 9210 N0009-1-1978  (Detail specification for radio frequency connectors (series SMC) - Unsealed, soldered, captive contact, 50 ohms, screw coupling - Full assessment level
147BS 9210 N001-1-1975  (Detail specification for radio frequency connectors (type BNC) - Sealed, soldered, captive contact, 50 ohms - Full assessment level
148BS 9210 N007-2-1976  (Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Control drawings - Mating face details and gauge information
149BS 9210 N007-1-1976  (Detail specification for radio frequency connectors (type SMB) - Unsealed, soldered, captive contact, 50 ohms, snap-on couplings - Full assessment level
150BS EN ISO 2592-2001  (Determination of flash and fire points - Cleveland open cup method
     Next Page
Order the standard:BS
TEL: 86 10 88099016; FAX: 86 10 88097217; MSN: selina2ycx@hotmail.com

Sponsored Links
Chinese Translation Service
Documents Translation, Chinese-English
Language, Conference/Simultaneous Interpreter
Contact US: 86 10 8809 7400
E-mail: anny@hlyt.com
URL:http://www.hlyt.com/english/hlyt.htm

Engineering Project Service in China
Project Bidding, Information Service, Market
research, Quality Assurance Services, Non
Destructive Testing, Consultancy, Testing and
Training , R & D, Investing... IN CHINA
Contact ISQ-China: 86 10 8809 7217
E-mail: zxd@hlyt.com
URL:http://www.isq.pt
 
TEL: 86 10 8809 9016
MSN: gbstandard@hotmail.com
Chinese Standards Search  
 Chinese Version 

Copyright conserved by Chinese standard translation.net©1999-2008
Technology support by Beijing Hualian-Yatong Network Information Technology Co.,LTD
Tel：86 10 88099016 88097400 Fax：86 10 88097217
Address：Room 1605, B Tower, SIGMA Building,
No.49 Zhichun Road, Haidian District, Beijing